English
RFQ

Download the app

What is PID Control?

Encyclopedia

08/03/2024

What is PID Control?

PID Controller Definition

A PID controller is a crucial device in control systems that adjusts the control action based on proportional, integral, and derivative terms of the error.

Control Parameters

Proportional (Kp), integral (Ki), and derivative (Kd) components each uniquely influence the response and stability of control systems.

Proportional Control

This mode adjusts the output proportionally to the error, which is the difference between desired and actual performance.

Integral and Derivative Actions

Integral control focuses on the accumulation of past errors, whereas derivative control predicts future errors, helping to refine the control process.

Applications and Limitations

PID controllers are versatile and widely used in modern industrial applications, though they face challenges in noisy environments and optimal control scenarios.

Topics

Power systems Control systems PID Control

Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

What is Voltage Stability in Power Systems?

What is Voltage Stability in Power Systems?

Definition of Voltage StabilityVoltage stability in a power system is defined as the ability to maintain acceptable voltages at all buses under both normal operating conditions and after being subjected to a disturbance. In normal operation, the system’s voltages remain stable; however, when a fault or disturbance occurs, voltage instability may arise, leading to a progressive and uncontrollable voltage decline. Voltage stability is sometimes referred to as "load stability."Voltage instability c

What is Dual Trace Oscilloscope？

What is Dual Trace Oscilloscope？

What is Dual Trace Oscilloscope？DefinitionA dual-trace oscilloscope uses a single electron beam to generate two separate traces, each deflected by an independent input source. To produce these two traces, it primarily employs two operating modes—alternate mode and chopped mode—controlled by a switch.Purpose of a Dual-Trace OscilloscopeWhen analyzing or studying multiple electronic circuits, comparing their voltage characteristics is often critical. While one could use multiple oscilloscopes for

What is Cathode Ray Oscilloscope (CRO)？

What is Cathode Ray Oscilloscope (CRO)？

What is Cathode Ray Oscilloscope (CRO)？DefinitionA cathode ray oscilloscope (CRO) is an electrical instrument for measuring, analyzing and visualizing waveforms and other electronic/electrical phenomena. As a high - speed X - Y plotter, it shows an input signal against another signal or time. Capable of analyzing waveforms, transient phenomena and time - varying quantities across a wide frequency range (from very low to radio frequencies), it mainly operates on voltage. Other physical quantities

What is Automatic Voltage Regulator?

What is Automatic Voltage Regulator?

An automatic voltage regulator is employed to regulate voltage, converting fluctuating voltages into a constant one. Voltage fluctuations mainly stem from variations in the load on the supply system. Such voltage variations can damage the equipment within the power system. These fluctuations can be mitigated by installing voltage - control equipment at various locations, such as near transformers, generators, and feeders. Multiple voltage regulators are often placed throughout the power system t

Source professional electrical partners, experts, and explore smart grid & energy solutions.