NAL12kV indoor air insulated isolation switch
Key attributes
| Brand | Switchgear parts |
| Model NO. | NAL12kV indoor air insulated isolation switch |
| Rated voltage | 12kV |
| Rated normal current | 1250A |
| Series | NAL |
Product descriptions from the supplier
NAL Indoor Air Switch Disconnector is an air insulated isolation switch designed specifically for indoor power distribution scenarios. Its core is used for safe isolation and on/off control of circuits. With air as the insulation medium, it does not require SF6 gas and is suitable for the intrinsic safety and environmental protection needs of medium and low voltage distribution systems. It is a key electrical accessory to ensure the safety of circuit maintenance and equipment upkeep.
Core Features
Adopting an air insulated structure, there are no greenhouse gases such as SF6, making it environmentally friendly and pollution-free. There is no need to worry about gas leakage risks during installation and use, which is in line with the trend of green power distribution.
The switch mechanism is designed with precision, with clear opening and closing actions and accurate positioning. The insulation performance of the fracture is stable, which can reliably achieve physical isolation of the circuit and ensure maintenance safety.
Integrate multiple anti misoperation interlocks (such as opening and closing position interlocks, grounding interlocks), strictly follow power safety regulations, and effectively avoid safety hazards caused by misoperations.
The shell is made of corrosion-resistant and anti-aging materials, with high mechanical strength, suitable for complex environments such as indoor distribution rooms, industrial plants, and commercial buildings, and easy installation and maintenance.
Applicable scenarios
Adapting to medium and low voltage indoor distribution systems, it is widely used in transformer circuits, distribution line branches, electrical equipment front-end and other scenarios. It can be used as a key component for maintenance isolation, load isolation and circuit conversion, and is suitable for industrial distribution, urban distribution networks, commercial complexes, data centers and other places.
Standard
The LBS complies with the following specifications in accordance with DIN VDE and therelevant IEC publications:60129, 60265, 60694, GOST 1516.3-96, GOST 17717-79, and CSA Standard No.C22.2, No. 193, and IEC62271-105, all of which consider switches for general use and ensurethere is safe switching coordination between a switch disconnector and a current limiting fuse.
parameter table
|
Model NO. |
NAL |
|
Poles Number |
3 |
|
Type |
Circuit Breaker |
|
Function |
Over current Protection, Load Break Switch |
|
Certification |
ISO9001-2000, CCC, Type Testing |
|
Transport Package |
Normal Export Case |
|
Origin |
China |
|
HS Code |
8538900000 |
Key advantages: ① Air insulation design, no SF6 gas, environmentally friendly and maintenance-free; ② Visible breaking gap, in line with safety operation specifications, easy to check isolation status; ③ Compact structure, small installation space, suitable for indoor switchgear; ④ High mechanical strength, reliable operation, service life up to 10,000 times of opening and closing; ⑤ Good corrosion resistance, adaptable to harsh indoor industrial environments.
Its core function is to provide visible isolation in 12kV indoor power distribution systems, ensuring safe maintenance of electrical equipment and isolating faulty sections to avoid power grid accidents. Working principle: It relies on air as the insulation medium, and realizes circuit on/off and isolation through manual or electric operation of the moving contact and fixed contact. When opened, it forms a visible breaking gap that meets the standard, achieving reliable electrical isolation between the power source and the load.
Related Products
-
12KV environmentally friendly (air insulated without SF6 gas) vacuum circuit breaker switch (upper isolation)
-
12KV environmentally friendly (air insulated SF6 gas free, nitrogen filled) isolation switch
-
12KV environmentally friendly (air insulated without SF6 gas) vacuum circuit breaker switch under isolation
-
12kV environmentally friendly fully sealed (air insulated without SF6 gas) upper isolation circuit breaker switch
-
Isolation operating mechanism on 12kV environmental protection cabinet (air insulated without SF6 gas)
-
Isolation operating mechanism under 12kV environmental protection cabinet (air insulated without SF6 gas)
-
12kV environmental protection cabinet (air insulated without SF6 gas) PT isolation operating mechanism
Related Knowledges
-
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026 -
What’s the Difference Between Rectifier Transformers and Power Transformers?What is a Rectifier Transformer?"Power conversion" is a general term encompassing rectification, inversion, and frequency conversion, with rectification being the most widely used among them. Rectifier equipment converts input AC power into DC output through rectification and filtering. A rectifier transformer serves as the power supply transformer for such rectifier equipment. In industrial applications, most DC power supplies are obtained by combining a rectifier transformer with rectifier equ01/29/2026
