What are the components of an AC motor starter?

Encyclopedia
11/07/2024

The components of an AC motor starter

The starter for AC motor is a device used to start an AC motor, and its main components include several key parts:

1. Electromagnetic Components

Electromagnetic components are one of the core parts of an AC motor starter. They use electromagnetic principles to connect and disconnect the starter and the motor. When the starter is connected to the power supply, current flows through the coil to generate a magnetic field. This magnetic field attracts the iron core in the starter, causing it to move. The movement of the iron core causes the mechanical switch in the starter to close, connecting the power supply to the coil of the motor and allowing the motor to start running.

2. Control Circuit

The control circuit is used to implement the start and stop control of the motor. When it is necessary to start the motor, the control circuit will send a start signal to the starter, which will connect the power supply and thus start the motor. When it is necessary to stop the motor, the control circuit will send a stop signal to the starter, which will disconnect the power supply and thus stop the operation of the motor.

3. Main Contactor

The main contactor is used to control the starting and stopping of the motor and is an important component of the starter. It can connect the power supply when the motor starts and disconnect the power supply when the motor stops.

4. Thermal relay

A thermal relay is used to protect electric motors from damage caused by overloads and short circuits. When a current of 1.2 times the rated current flows through it, the thermal relay can automatically trip and cut off the power within 20 minutes.

5. Button Switch

The button switch is used for manual control of the motor's start, stop, and direction change. By operating the button switch, remote control of the motor can be achieved.

6. Auxiliary Components

Assisting components include filters and contactors. Filters are used to eliminate electromagnetic interference generated during the operation of the motor, ensuring the normal functioning of the motor. Contactors, on the other hand, are employed to control the direction of the motor, enabling forward and reverse functions.

7. Autotransformer (Autotransformer Voltage Reduction Starter)

Autotransformers are used for reduced voltage starting, where the autotransformer is used to reduce the voltage for infrequent starting of electric motors. Autotransformer voltage reduction starters can be equipped with overload protection, which will automatically trip and cut off the power within 20 minutes when the current reaches 1.2 times the rated current.

8. Time Relay (Star-Delta Starter)

The time relay is used in the star-delta starter to achieve the purpose of reduced voltage starting by changing the connection mode of the stator winding. The star-delta starter is suitable for low-voltage cage-type motors with delta winding during normal operation and six output terminals.

The above are the main components of the AC motor starter, and these components work together to ensure that the motor can start and run safely and efficiently.

Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil
Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil
For users, when purchasing a 35kV new energy transformer, choosing between dry-type, mineral oil-filled, or vegetable oil-filled types involves multiple considerations. These include user habits, maintenance-free performance, safety and fire resistance, volume and weight, among others. However, cost differences are undoubtedly one of the most crucial factors.To illustrate the issue intuitively, this paper selects a three-level energy efficiency dual-winding new energy transformer with a rated ca
Ron
07/26/2025
What is the connection group of a transformer?
What is the connection group of a transformer?
Transformer Connection GroupThe connection group of a transformer refers to the phase difference between the primary and secondary voltages or currents. It is determined by the winding directions of the primary and secondary coils, the labeling of their start and end terminals, and the connection mode. Expressed in a clock-like format, there are 12 groups in total, numbered from 0 to 11.The DC method is commonly used to measure the transformer's connection group, mainly to verify whether the con
Vziman
07/26/2025
What is the sequence for powering down the transformer?
What is the sequence for powering down the transformer?
The sequence for shutting down a main transformer is as follows: when de-energizing, the load side should be shut down first, followed by the power supply side. For energizing operations, the reverse order applies: the power supply side is energized first, then the load side. This is because: Energizing from the power supply side to the load side makes it easier to identify the fault range and take prompt judgment and handling measures in case of a fault, preventing the fault from spreading or e
Rockwell
07/26/2025
What are the methods for switching operations of station transformers?
What are the methods for switching operations of station transformers?
Let's take an auxiliary power system with two station transformers as an example. When one station transformer needs to be out of service, there are two operation methods: non-interruptive power supply and instantaneous power interruption. Generally, the method of instantaneous power interruption on the low-voltage side is preferred.The operation method for instantaneous power interruption on the low-voltage side is as follows:Open the 380V power incoming circuit breaker of the corresponding sec
Vziman
07/26/2025
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!