English
RFQ

Download the app

What are Crawling and Cogging of Induction Motor?

Encyclopedia

08/14/2024

What are Crawling and Cogging of Induction Motor?

Induction Motor Phenomena

Crawling and cogging are important characteristics to understand in the operation of squirrel cage induction motors.

Crawling Definition

This is when an induction motor runs at much lower speeds than its designed speed, primarily caused by harmonics like the 5th and 7th producing additional torque.

Cogging in Induction Motor

Occurs when the motor fails to start because the slots of the stator lock up with the rotor slots, often due to matching slot numbers or harmonic interference.

Preventing Cogging

The number of slots in rotor should not be equal to the number of slots in the stator.
Skewing of the rotor slots, that means the stack of the rotor is arranged in such a way that it angled with the axis of the rotation.

Understanding Harmonics

Recognizing how harmonic frequencies interact with the motor’s slot frequencies is crucial for diagnosing and solving motor issues like cogging and crawling.

Topics

Machines Induction Motor Crawling and Cogging

Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil

Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil

For users, when purchasing a 35kV new energy transformer, choosing between dry-type, mineral oil-filled, or vegetable oil-filled types involves multiple considerations. These include user habits, maintenance-free performance, safety and fire resistance, volume and weight, among others. However, cost differences are undoubtedly one of the most crucial factors.To illustrate the issue intuitively, this paper selects a three-level energy efficiency dual-winding new energy transformer with a rated ca

What is the connection group of a transformer?

What is the connection group of a transformer?

Transformer Connection GroupThe connection group of a transformer refers to the phase difference between the primary and secondary voltages or currents. It is determined by the winding directions of the primary and secondary coils, the labeling of their start and end terminals, and the connection mode. Expressed in a clock-like format, there are 12 groups in total, numbered from 0 to 11.The DC method is commonly used to measure the transformer's connection group, mainly to verify whether the con

What is the sequence for powering down the transformer?

What is the sequence for powering down the transformer?

The sequence for shutting down a main transformer is as follows: when de-energizing, the load side should be shut down first, followed by the power supply side. For energizing operations, the reverse order applies: the power supply side is energized first, then the load side. This is because: Energizing from the power supply side to the load side makes it easier to identify the fault range and take prompt judgment and handling measures in case of a fault, preventing the fault from spreading or e

What are the methods for switching operations of station transformers?

What are the methods for switching operations of station transformers?

Let's take an auxiliary power system with two station transformers as an example. When one station transformer needs to be out of service, there are two operation methods: non-interruptive power supply and instantaneous power interruption. Generally, the method of instantaneous power interruption on the low-voltage side is preferred.The operation method for instantaneous power interruption on the low-voltage side is as follows:Open the 380V power incoming circuit breaker of the corresponding sec

Source professional electrical partners, experts, and explore smart grid & energy solutions.