Product
Suppliers
Manufacturers
Solutions
Free tools
Knowledges
Experts
Communities

Search

What is CSST Bonding ?

Field: Encyclopedia

0

China

What is CSST Bonding ?

CSST Bonding Definition

CSST (Corrugated Stainless-Steel Tubing) bonding is defined as connecting a conductor to the CSST gas pipe and grounding system to ensure safety

Necessity of CSST Bonding

Proper bonding reduces the risk of fires or explosions caused by lightning strikes or power surges.

Proper Bonding Technique

A bonding wire should connect to the rigid gas piping or directly to the CSST fitting, ensuring a secure and continuous path to the ground.

Code Compliance

CSST bonding must comply with National Fuel Gas Code, International Fuel Gas Code, and Uniform Plumbing Code requirements.

How to Bond CSST Gas Line Diagram

The diagram shows the correct way to bond CSST, ensuring the system is safely connected and grounded.

Give a tip and encourage the author!

Topics:

Power Systems

Electrical Safety

CSST Bonding

About experts

Encyclopedia

0

China

Professional article

Recommended

Classification of Equipment Defects for Relay Protection and Safety Automatic Devices in Substations

Classification of Equipment Defects for Relay Protection and Safety Automatic Devices in Substations

In daily operations, various equipment defects are inevitably encountered. Whether maintenance personnel, operation and maintenance staff, or specialized management personnel, all must understand the defect classification system and adopt appropriate measures according to different situations.According to Q/GDW 11024-2013 "Operation and Management Guide for Relay Protection and Safety Automatic Devices in Smart Substations," equipment defects are classified into three levels based on severity an

12/15/2025

Under What Conditions Will the Line Circuit Breaker Auto-Reclosing Signal Be Locked Out?

Under What Conditions Will the Line Circuit Breaker Auto-Reclosing Signal Be Locked Out?

The line circuit breaker auto-reclosing signal will be locked out if any of the following conditions occur:(1) Low SF6 gas pressure in circuit breaker chamber at 0.5MPa(2) Insufficient energy storage in circuit breaker operating mechanism or low oil pressure at 30MPa(3) Busbar protection operation(4) Circuit breaker failure protection operation(5) Line distance protection zone II or zone III operation(6) Short lead protection operation of circuit breaker(7) Presence of remote tripping signal(8)

12/15/2025

Application of Auto-Reclosing Residual Current Protective Devices in Lightning Protection for Communication Power Supplies

Application of Auto-Reclosing Residual Current Protective Devices in Lightning Protection for Communication Power Supplies

1. Power Interruption Problems Caused by RCD False Tripping During Lightning StrikesA typical communication power supply circuit is shown in Figure 1. A residual current device (RCD) is installed at the power supply input terminal. The RCD primarily provides protection against electrical equipment leakage currents to ensure personal safety, while surge protective devices (SPDs) are installed on power supply branches to protect against lightning intrusions. When lightning strikes occur, the senso

12/15/2025

Reclosing Charge Time: Why Does Reclosing Require Charging? What Effects Does Charging Time Have?

Reclosing Charge Time: Why Does Reclosing Require Charging? What Effects Does Charging Time Have?

1. Function and Significance of Reclosing ChargingReclosing is a protective measure in power systems. After faults such as short circuits or circuit overloads occur, the system isolates the faulty circuit and then restores normal operation through reclosing. The function of reclosing is to ensure continuous operation of the power system, improving its reliability and safety.Before performing reclosing, the circuit breaker must be charged. For high-voltage circuit breakers, the charging time is g

12/15/2025

About experts

Encyclopedia

0

China

Professional article