Hollow Wrist Robot
Key attributes
| Brand | Wone Store |
| Model NO. | Hollow Wrist Robot |
| Rated Load Capacity | 15kg |
| degree of freedom | 6-direction |
| Maximum working stroke | 2000mm |
| Series | JH |
Product descriptions from the supplier
The large hollow wrist robot developed by JH Series Robot is a new breakthrough in product research and development technology for many years. It is superior to regular general-purpose products in terms of ease of use and coverage width of application scenarios, and has the unique advantages of large hollow, high speed and high precision.
Key features:
1. High rigidity: 40% higher rigidity compared to the previous generation, delivering improved stability and outstanding performance in reducing operational vibration.
2. High Speed: By incorporating a higher-speed motor and a superior-performing gearbox, we achieve faster cycle times and enhanced operational efficiency.
3. High Precision: The new-generation welding robot achieves a repeat positioning accuracy of up to ±0.05mm, with trajectory accuracy and repeatability—along with other precision metrics—showing a 20% improvement over the previous generation.
4. Excellent Reach: The working radius reaches up to 2000 mm, with each axis offering a significantly improved range of motion compared to the previous generation—resulting in overall enhanced accessibility.
5. Practicality: With a smaller wrist size, it significantly enhances the convenience of teaching demonstrations. The hollow structure allows for the use of a hollow welding torch.
6. Strong Anti-Interference Capability: The robot features a completely new anti-interference structure, significantly enhancing its ability to withstand external disturbances.
Technology Parameters
| Industrial robots | JH605-1500 | JH615-2000 | JH620-1800 | |
| Degrees of freedom | 6 | 6 | 6 | |
| Maximum load | 5kg | 15kg | 20kg | |
| Maximum working radius | 1494mm | 2000mm | 1800mm | |
| Repeat positioning accuracy | ±0.05 m | ±0.05 mm | ±0.05 mm | |
| Range of motion | J1 | ±170° | ±165° | ±165° |
| J2 | -175°/+60° | -165°/+75° | -165°/+75° | |
| J3 | +6° / +270° | -15°/ +260° | -15°/ +260° | |
| J4 | ±180° | ±170° | ±170° | |
| J5 | -120° / +150° | ±140° | ±140° | |
| J6 | ±360° | ±400° | ±400° | |
| Maximum speed | J1 | 225°/s, 3.92 rad/s | 220°/s, 3.84 rad/s | 220°/s, 3.84 rad/s |
| J2 | 225°/s, 3.92 rad/s | 205°/s, 3.58 rad/s | 205°/s, 3.58 rad/s | |
| J3 | 252°/s, 4.40 rad/s | 220°/s, 3.84 rad/s | 220°/s, 3.84 rad/s | |
| J4 | 407°/s, 7.10 rad/s | 330°/s, 5.76 rad/s | 330°/s, 5.76 rad/s | |
| J5 | 600°/s, 10.47 rad/s | 420°/s, 7.33 rad/s | 420°/s, 7.33 rad/s | |
| J6 | 927°/s, 16.18 rad/s | 670°/s, 11.7 rad/s | 670°/s, 11.7 rad/s | |
| Allowing the moment of inertia | J6 | 0.2 kgm3 | 2.8 kgm3 | 2.8 kgm3 |
| J5 | 0.4 kgm3 | 2.2 kgm3 | 2.2 kgm3 | |
| J4 | 0.4 kgm3 | 1 kgm3 | 1 kgm3 | |
| Allowable Torque | J6 | 6.5Nm | 60Nm | 60Nm |
| J5 | 12Nm | 52Nm | 52Nm | |
| J4 | 12Nm | 32Nm | 32Nm | |
| Applicable Environment | Temperature | 0°C to 45°C | 0°C to 45°C | 0°C to 45°C |
| Humidity | 20% to 80% | 20% to 80% | 20% to 80% | |
| Other | Avoid contact with flammable, explosive, or corrosive gases and liquids, and keep away from sources of electronic noise (such as plasma). | Avoid contact with flammable, explosive, or corrosive gases and liquids, and keep away from sources of electronic noise (such as plasma). | Avoid contact with flammable, explosive, or corrosive gases and liquids, and keep away from sources of electronic noise (such as plasma). | |
| Teaching device cable length | 8m | 8m | 8m | |
| Body-to-cabinet connection cable length | 5m | 5m | 5m | |
| I/O parameters | Digital inputs: 32-bit (NPN), 32-bit outputs (NPN) | Digital quantities: 32-bit input, 31-bit output | Digital quantities: 32-bit input, 31-bit output | |
| Body-prepared signal cable | 24-bit, 4-bit (wiring method for aviation connector: soldering) | 24-bit | 24-bit | |
| Reserved air circuit | 1xφ8 | 3xφ8 | 3xφ8 | |
| Power capacity | 4.5kVA | 6.9kVA | 6.9kVA | |
| Rated Power | 3.6kW | 5kW | 5kW | |
| Rated Voltage | Single-phase AC 220V | Three-phase 380V | Three-phase 380V | |
| Rated current | 19A | 9.3A | 9.3A | |
| Intrusion Protection Rating | IP54 | IP54 (arm IP67) | IP54 (arm IP67) | |
| Installation method | Ground, inverted, and side-mounted installations | Ground, inverted, and side-mounted installations | Ground, inverted, and side-mounted installations | |
| Body weight | 185kg | 285kg | 280kg | |
| Protection rating of control cabinets | IP20 | IP54 | IP54 | |
| Control cabinet weight | 15kg | 28kg | 28kg | |
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Wire cable/High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Instrument meters/New energy/Tester/Integrated Electrical Equipment/Production equipment/Generator/Electrical fittings/Instrument Transformer/Equipment Parts
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
Related Knowledges
-
Why is it difficult to increase the voltage level?The solid-state transformer (SST), also known as a power electronic transformer (PET), uses voltage level as a key indicator of its technological maturity and application scenarios. Currently, SSTs have reached voltage levels of 10 kV and 35 kV on the medium-voltage distribution side, while on the high-voltage transmission side, they remain in the stage of laboratory research and prototype validation. The table below clearly illustrates the current status of voltage levels across different appliEcho11/03/2025 -
Compact Air-Insulated RMUs for Retrofit & New SubstationsAir-insulated ring main units (RMUs) are defined in contrast to compact gas-insulated RMUs. Early air-insulated RMUs used vacuum or puffer-type load switches from VEI, as well as gas-generating load switches. Later, with the widespread adoption of the SM6 series, it became the mainstream solution for air-insulated RMUs. Similar to other air-insulated RMUs, the key difference lies in replacing the load switch with an SF6-encapsulated type—where the three-position switch for load and grounding isEcho11/03/2025 -
Standards and Calculation of LTAC Test for Power Transformers1 IntroductionAccording to the provisions of the national standard GB/T 1094.3-2017, the primary purpose of the line terminal AC withstand voltage test (LTAC) for power transformers is to evaluate the AC dielectric strength from the high-voltage winding terminals to ground. It does not serve to assess inter-turn insulation or phase-to-phase insulation.Compared with other insulation tests (such as full lightning impulse LI or switching impulse SI), the LTAC test imposes a relatively more stringenOliver Watts11/03/2025 -
Climate-Neutral 24kV Switchgear for Sustainable Grids | Nu1Expected service life of 30–40 years, front access, compact design equivalent to SF6-GIS, no SF6 gas handling – climate-friendly, 100% dry air insulation. The Nu1 switchgear is metal-enclosed, gas-insulated, featuring a withdrawable circuit breaker design, and has been type-tested according to relevant standards, approved by the internationally recognized STL laboratory.Compliance Standards Switchgear: IEC 62271-1 High-voltage switchgear and controlgear – Part 1: Common specifications for alternEdwiin11/03/2025 -
Busbar-Side Grounding for 24kV Eco-Friendly RMUs: Why & HowSolid insulation assistance combined with dry air insulation is a development direction for 24 kV ring main units. By balancing insulation performance and compactness, the use of solid auxiliary insulation allows passing insulation tests without significantly increasing phase-to-phase or phase-to-ground dimensions. Encapsulation of the pole can address the insulation of the vacuum interrupter and its connected conductors.For the 24 kV outgoing busbar, with the phase spacing maintained at 110 mm,Dyson11/03/2025 -
How Vacuum Tech Replaces SF6 in Modern Ring Main UnitsRing main units (RMUs) are used in secondary power distribution, directly connecting to end-users such as residential communities, construction sites, commercial buildings, highways, etc.In a residential substation, the RMU introduces 12 kV medium voltage, which is then stepped down to 380 V low voltage through transformers. The low-voltage switchgear distributes electrical energy to various user units. For a 1250 kVA distribution transformer in a residential community, the medium-voltage ring mJames11/03/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
