HXGN17-12 12kV Box-type metal enclosed ring main unit for urban power grid
Key attributes
| Brand | Switchgear parts |
| Model NO. | HXGN17-12 12kV Box-type metal enclosed ring main unit for urban power grid |
| Rated voltage | 12kV |
| Rated normal current | 630A |
| Rated frequency | 50/60Hz |
| Series | HXGH17 |
Product descriptions from the supplier
The HXGN17-12 AC Metal-enclosed Ring Main Unit Switchgear (hereinafter referred to as "ring main unit") is a new product designed and developed by from oversea advanced latest techniques. The technical indicators of the product reaches standard of IEC62271-200 and GB3906. The product is characterized by small volume,light weight,operation flexibility,maintenance convenience, and quality stability & reliability, and it comes out with perfect interlock protection functions and IP3X protecton grade, so it is an ideal product for mains grid reconstruction. The product is mainly applicable to three-phase AC network for receiving and distributing energy.
Mainly applicable in urban power grid construction and renovation project. industrial and mining enterprises.high-rise buildings and communal facilities .For power distribution .controlling and protection on electric equipment as the loop power supply unit or termina equipment. It also can be installed in preloaded substation.
Working Environment
1.Altitude: Not exceed 2500m above sea level
2.Ambient temperature:-25℃ ~ +45℃, the highest temperature is not exceed25℃
3.Ambient humidity: Daily average RH ≤ 95%; Monthly average RH ≤ 90%
4.Earthquake intensity: ≤ 8°
5.No flammable, explosive, no serious pollution, No chemical corrosion and severe vibration.
Technical Parameters
|
No. |
Item |
Unit |
Data |
||
|
FN12-10 |
FZN25-12 |
||||
|
1 |
Rated voltage |
kV |
12 |
12 |
|
|
2 |
Rated current |
load break switchgear |
A |
630 |
630 |
|
Combined switchgear |
A |
125 |
125 |
||
|
3 |
Rated frequency |
Hz |
50 |
50 |
|
|
4 |
Rated short-circuit breaking current |
kA |
31.5 |
31.5 |
|
|
Rated short-time withstand current |
kA |
20 |
20 |
||
|
Rated active on-load breaking current |
A |
630 |
630 |
||
|
5 |
Rated peak withstand current |
kA |
50 |
50 |
|
|
6 |
Rated power frequency voltage withstands inter-phase, to earth and to the open contact |
kV |
42 |
48 |
|
|
7 |
Thundering withstands voltage inter-phase, to earth and to the open the contact |
kV |
75 |
85 |
|
|
8 |
Mechanical life |
times |
10000 |
10000 |
|
|
9 |
Rated take-over current |
A |
3150 |
3150 |
|
|
10 |
Protection level |
IP2X |
IP2X |
||
|
11 |
Operating mode |
Manual or automatic |
Manual or automatic |
||
|
12 |
Control circuit rated voltage |
V |
DC: 110, AC:220 |
DC: 110, AC:220 |
|
Customization options include: ① Adjusting IP protection level (up to IP54 for harsh environments); ② Adding electric/manual operation mode switching; ③ Matching different accessories for box-type substation integration. Contact our technical team with your specific voltage, current, or environmental needs for tailored solutions.
Both are 12kV switchgears, but HXGN17-12 adopts a single-busbar structure with integrated "five-prevention" interlock, more suitable for frequent operation and terminal power supply. HXGN15-12 uses SF6 composite switches with air insulation, focusing on distribution automation expandability. Choose HXGN17-12 for scenarios requiring compact structure and stable interlocking performance.
It is a fixed metal-enclosed switchgear designed for 3-12kV AC 50/60Hz power systems with rated current ≤630A. Ideal for industrial and mining enterprises, box-type substations, urban power grids, and high-rise building power distribution, it excels in frequent operation scenarios with reliable power control and protection functions.
Related Products
-
SF6-free MV air-insulated switchgear
-
GGJ 12kV reactive power cabinet for terminal power supply system
-
12kV 15kV 17.5kV 24kV SF₆ gas-free ring main unit/switchboard panel Original Manufacturer
-
11.5kV 13.2kV 14.4kV 17.5kV SF₆ gas-free ring main unit /switchgear source manufacturer
-
10.5kV 11kV 11.5kV 12kV Solid Insulated Ring Main Unit/Switchgear source manufacturer
-
17.5kV 20kV 21.9kV 24kV Solid Insulation Ring Main Unit/ distribution board
-
22kV 24kV 30kV 33kV Solid Insulated Switchgear/switchboard panel
Related Knowledges
-
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025 -
Risk Identification and Control Measures for Distribution Transformer Replacement Work1.Electric Shock Risk Prevention and ControlAccording to typical design standards for distribution network upgrades, the distance between the transformer’s drop-out fuse and the high-voltage terminal is 1.5 meters. If a crane is used for replacement, it is often impossible to maintain the required minimum safety clearance of 2 meters between the crane boom, lifting gear, slings, wire ropes, and the 10 kV live parts, posing a severe risk of electric shock.Control Measures:Measure 1:De-energize th12/25/2025
