SAFE-TWO-HAND Monitoring Relay
Key attributes
| Brand | Switchgear parts |
| Model NO. | SAFE-TWO-HAND Monitoring Relay |
| Rated frequency | 50/60Hz |
| Series | SAFE |
Product descriptions from the supplier
SAFE-TWO-HAND safety relay is a very compact universal safety dual hand control device. It complies with EN ISO 13851, type IIIC, and is intended for use in safety circuits designed according to EN 60204-1, such as on stamping machines, punch presses, and bending equipment. Due to its internal error monitoring, dual hand safety relays can be used for applications that comply with safety level 4 of EN ISO 13849-1, SILCL 3 of EN 62061, or type III C of EN ISO 13851.
Safety relay for two-hand monitoring up to SIL3 and Type IIIC
Function
2 safe relay contacts, input per push button 1 N/O, 1 N/C, automatic start, Type IIIC, up to SIL 3 / Cat. 4, PL e, 24 V AC/DC, width: 22.5 mm
Features
2 N/O Safety Contacts
Two-Hand Push Buttons
SIL CL 3 (EN 62061 / IEC 61508)
Type IIIC (EN ISO 13851)
| Parameter | Specification |
|---|---|
| In compliance with | EN ISO 13851, EN 60204-1, EN ISO 13849-1, EN 62061 |
| Operating voltage | AC/DC 24 V +/- 10 % |
| Power consumption | AC 3.5 VA/DC 1.5 W |
| Rated supply frequency | 50 - 60 Hz |
| Control voltage at S11 and S22 | DC 24 V |
| Control current | typical 2 x 40 mA |
| Safety contacts non-delayed | 2 NO |
| Max. switching voltage | AC 250 V |
| Contact rating of safety contacts
|
AC: 250 V, 1500 VA, 6 A for resistive load
|
| Max. total current through all contacts | 12 A |
| Minimum contact load | 5 V, 10 mA |
| External fuses | 10 A gG |
| Release time for the safety relays after release of a button | < 20 ms |
| Response delay after actuation of the buttons | < 20 ms |
| Synchronization time | 0.5 s |
| Max. length of control line | 1000 m at 0.75 mm² |
| Wire width | 0.14 - 2.5 mm² |
| Tightening moment (Min./Max.) | 0.5 Nm/0.6 Nm |
| Contact material | AgSnO₂ |
| Service Life | mech. approx. 1×10⁷ |
| Test voltage | 2.5 kV (control voltage/contacts) |
| Rated impulse withstand voltage, leakage path/air gap | 4 kV (DIN VDE 0110-1) |
| Rated insulation voltage | 250 V |
| Degree of pollution/Overvoltage category | 2/3 (DIN VDE 0110-0) |
| Protection | IP20 |
| Temperature range Ambient | -15 °C to +60 °C (max. +40 °C for AC use) |
| Temperature range Storage | -15 °C to +85 °C |
| Max. altitude | ≤ 2000 m (above sea level) |
| Weight approx. | 190 g |
| Mounting DIN rail according to EN 60715 | TH35 |
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Low Voltage Electrical Apparatus/Instrument meters/Tester/Production equipment/Electrical fittings/Equipment Parts
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
GRW8-01 02 Temperature Monitoring Relay
-
Digital Timer Switch TS-GE2 Programmable Periodic Timer
-
Digital Timer Switch THC 822 16A Weekly Programmable
-
Digital Timer Switch THC 109-16A Light Dependent Relay ＆accessories
-
Digital Timer Switch THC 109B-16A Light Dependent Relay ＆accessories
-
Digital Timer Switch THC 15A Programmable Periodic Timer
-
Digital Timer Switch THC 20-1C Weekly Programmable
Related Knowledges
-
Climate-Neutral 24kV Switchgear for Sustainable Grids | Nu1Expected service life of 30–40 years, front access, compact design equivalent to SF6-GIS, no SF6 gas handling – climate-friendly, 100% dry air insulation. The Nu1 switchgear is metal-enclosed, gas-insulated, featuring a withdrawable circuit breaker design, and has been type-tested according to relevant standards, approved by the internationally recognized STL laboratory.Compliance Standards Switchgear: IEC 62271-1 High-voltage switchgear and controlgear – Part 1: Common specifications for alternEdwiin11/03/2025 -
Busbar-Side Grounding for 24kV Eco-Friendly RMUs: Why & HowSolid insulation assistance combined with dry air insulation is a development direction for 24 kV ring main units. By balancing insulation performance and compactness, the use of solid auxiliary insulation allows passing insulation tests without significantly increasing phase-to-phase or phase-to-ground dimensions. Encapsulation of the pole can address the insulation of the vacuum interrupter and its connected conductors.For the 24 kV outgoing busbar, with the phase spacing maintained at 110 mm,Dyson11/03/2025 -
How Vacuum Tech Replaces SF6 in Modern Ring Main UnitsRing main units (RMUs) are used in secondary power distribution, directly connecting to end-users such as residential communities, construction sites, commercial buildings, highways, etc.In a residential substation, the RMU introduces 12 kV medium voltage, which is then stepped down to 380 V low voltage through transformers. The low-voltage switchgear distributes electrical energy to various user units. For a 1250 kVA distribution transformer in a residential community, the medium-voltage ring mJames11/03/2025 -
What Are the Handling Procedures After Transformer Gas (Buchholz) Protection Activation?What Are the Handling Procedures After Transformer Gas (Buchholz) Protection Activation?When the transformer gas (Buchholz) protection device operates, a thorough inspection, careful analysis, and accurate judgment must be carried out immediately, followed by appropriate corrective actions.1. When the Gas Protection Alarm Signal is ActivatedUpon activation of the gas protection alarm, the transformer should be inspected immediately to determine the cause of operation. Check whether it was causedFelix Spark11/01/2025 -
What Is THD? How It Affects Power Quality & EquipmentIn the field of electrical engineering, the stability and reliability of power systems are of paramount importance. With the advancement of power electronics technology, the widespread use of nonlinear loads has led to an increasingly serious problem of harmonic distortion in power systems.Definition of THDTotal Harmonic Distortion (THD) is defined as the ratio of the root mean square (RMS) value of all harmonic components to the RMS value of the fundamental component in a periodic signal. It isEncyclopedia11/01/2025 -
THD Overload: How Harmonics Destroy Power EquipmentWhen Actual Grid THD Exceeds Limits (e.g., Voltage THDv > 5%, Current THDi > 10%), It Causes Organic Damage to Equipment Across the Entire Power Chain — Transmission → Distribution → Generation → Control → Consumption. The Core Mechanisms Are Additional Losses, Resonant Overcurrent, Torque Fluctuations, and Sampling Distortion. Damage Mechanisms and Manifestations Vary Significantly by Equipment Type, as Detailed Below:1. Transmission Equipment: Overheating, Aging, and Drastically ReducedEcho11/01/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
