UL 15-500kVA Oil Filled Single Phase Pad Mounted Transformer
Key attributes
| Brand | Vziman |
| Model NO. | UL 15-500kVA Oil Filled Single Phase Pad Mounted Transformer |
| Rated frequency | 50/60Hz |
| Rated capacity | 100kVA |
| Primary voltage | 33kV |
| Series | ZGS |
Product descriptions from the supplier
Description:
This is a single-phase oil-immersed pad-mounted transformer certified by UL, specially designed for outdoor installation. It complies with UL 1561 (Dry-Type Transformer) or UL 1562 (Oil-Immersed Transformer) standards, suitable for capacity ranges of 15-500kVA, with voltage classes covering 7.2kV-34.5kV (high-voltage side) and 120-600V (low-voltage side). Its features include:
- Structural Form: Adopts Pad-Mounted (box-type floor-mounted) design with a fully sealed structure, reaching IP65/66 protection rating, and can be directly placed on concrete foundations.
- Insulation Medium: Uses mineral oil or high-flash-point silicone oil as insulation and cooling media, with fire and explosion protection performance (complying with UL 1203 explosion-proof standards).
- Voltage Adaptation: The high-voltage side supports multiple voltage classes such as 7.2kV, 12.47kV, 13.8kV, 25kV, 34.5kV, etc., while the low-voltage side outputs 120V/240V (single-phase three-wire) or 208V/480V/600V (three-phase four-wire).
Core Functions:
- Voltage Conversion: Steps down medium voltage (e.g., 7.2kV) to low voltage (e.g., 240V) to meet the power demand of residential, commercial, or small industrial loads.
- Safety Isolation: Isolates the high and low voltage sides through an oil-immersed insulation design to improve safety.
- Overload Protection: Equipped with a temperature controller and pressure relief valve, which automatically cuts off power when the oil temperature exceeds the set value (e.g., 80°C) or internal pressure is abnormal.
- Environmental Adaptation: Withstands harsh environments such as high temperature, humidity, and dust, suitable for long-term outdoor operation.
Typical Application Scenarios:
- Residential Power Distribution: Provides single-phase 240V power for individual villas and residential areas, supporting high-power devices such as air conditioners and water heaters.
- Commercial Facilities: Supplies 120V/240V power for convenience stores, small shopping malls, gas stations, etc., meeting the needs of lighting and cash register systems.
- Small Industrial Loads: Provides power for farms and small processing plants, such as driving water pumps and small motors.
- Renewable Energy Access: Serves as a step-up or step-down device in photovoltaic and wind power projects, adapting to distributed power generation scenarios.
Parameter:
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 10000m²
Total staff:
Highest Annual Export(usD): 150000000
Services
Business Type: Design/Manufacture/Sales
Main Categories: High Voltage Electrical Apparatus/Electric transformer
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
YBS-Smart Transformer Station
-
33kV unitized compact substation
-
12kV 24kV 36kV 40.5kV Prefabricated Substation(US-style, EU-style)
-
11kV 20kV 35KV Pad Mounted Transformer(Prefabricated Substation)
-
Wind Power Equipment Box-type Transformer(Prefabricated Substation)
-
Compact and Prefabricated Substation
-
Shield chassis type substation Prefabricated Substation
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
Related Solutions
-
Choosing Vizman Distribution Transformers: Innovative Customization to Meet Diverse Power NeedsDistribution transformers are the heart of local electricity distribution systems. They step down voltage, enabling safe and efficient power supply to homes and businesses.At Vizman Electric Power Technology Co., Ltd., we understand the critical role of distribution transformers in the energy ecosystem. That's why we specialize in manufacturing high-quality distribution transformers, providing tailored solutions to meet diverse energy needs.1.Solutions Offered by Vizman Electric Power Technology04/16/2025 -
SF6 Circuit Breaker Solutions in High-Voltage Power Systems: A Case Study of VZIMAN Company1. Challenges in High-Voltage Power Systems1.1 High-voltage power systems, as the core of power transmission, face critical challenges:Equipment Performance Limits: With increasing voltage levels (e.g., 500kV and above), traditional circuit breakers struggle to meet high breaking capacities (over 40kA) and rapid insulation recovery requirements.Overvoltage Risks: Switching capacitive loads (e.g., capacitor banks) may cause reignition, leading to dangerous overvoltages.Poor Environmental Ada05/13/2025 -
VZIMAN Company SF6 Circuit Breaker Solutions for Renewable Energy Grid Integration1. Current Challenges in Renewable Energy Grid Integration1.1 Grid Frequency Fluctuations and Stability IssuesThe intermittency and variability of renewable energy sources (e.g., wind and solar) lead to frequent grid frequency changes. Traditional circuit breakers struggle to respond rapidly to such dynamic loads, potentially causing equipment damage or regional blackouts. For instance, during sudden drops in wind power or abrupt solar output fluctuations, the grid must isolate faults within m05/13/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
