XTL-B2 Wind Turbine Generator
Key attributes
| Brand | Wone Store |
| Model NO. | XTL-B2 Wind Turbine Generator |
| Rated power | 800W |
| Series | XTL |
Product descriptions from the supplier
Description
The XTL-B2 Wind Turbine Generator is a CE, ISO-certified renewable power solution. It works safely in harsh climates with no special maintenance, ideal for villas, base stations, and street lights. Sold globally, it delivers reliable independent power.
Unit characteristics
Security：The main stress points of the blades are concentrated in the hub, so the problems of blade falling, fracture and blade flying out are well solved.
Wind resistance：The horizontal rotation makes it less wind pressure and can resist super typhoons of 45 meters per second; The tail rudder adopts an automatic yaw design, with a folding tail type, which has stronger typhoon resistance.
Turning radius：Due to its different design structure and operating principle, it has a smaller turning radius than other forms of wind power generation, saving space and improving efficiency.
Power generation curve characteristics:The starting wind speed is lower than that of other forms of wind turbines, and the increase in power generation is relatively gentle, so in the range of 5~8 meters, its power generation is 10%~30% higher than that of other types of wind turbines.
Brake device:The blades themselves have speed protection, and can be equipped with mechanical manual and electronic automatic brakes, and in areas without typhoons and super gusts, only manual brakes need to be set.
Optimize design:The chassis is made of A3 steel, which is small in size, light in weight, beautiful in appearance, and low in operation. Flange installation, good strength, easy to install and maintain.
High utilization coefficient:The reinforced FRP wind turbine blades, with optimized aerodynamic shape design and structural design, have low starting wind speed and high wind energy utilization coefficient, increasing the annual power generation.
Good match:The use of permanent magnet rotor alternator for power generation effectively reduces the resistance torque of the generator, and at the same time, the use of wind turbines and generators has better matching characteristics, and the reliability of unit operation.
Regulating current:It can be equipped with a high-power tracking intelligent controller to effectively adjust the current.
Technical specifications:
Model |
XTL-B2-700 |
XTL-B2-800 |
Rated power |
700W |
800W |
Max power |
730W |
820W |
Nominal voltage |
24V/48V |
24V/48V |
Start-up wind speed |
2.5m/s |
2.5m/s |
Rated wind speed |
11m/s |
11m/s |
Survival wind speed |
45m/s |
45m/s |
Top net weight |
20kg |
21kg |
Wind wheel diameter |
1.8m |
1.9m |
Number of blades |
3/5 |
|
Blades material |
Nylon fiber |
|
Fuselage material |
aluminum alloy |
|
Generator |
Three phase ac permanent magnet generator |
|
Control System |
Electromagnet/wind wheel yaw |
|
Yaw Mode |
The wind Angle automatically |
|
Lubrication mode |
Self-lubricating |
|
Tower form |
Cable/freestanding pylon |
|
Working temperature |
-40℃～80℃ |
|
Related Products
Related Knowledges
-
Why is it difficult to increase the voltage level?The solid-state transformer (SST), also known as a power electronic transformer (PET), uses voltage level as a key indicator of its technological maturity and application scenarios. Currently, SSTs have reached voltage levels of 10 kV and 35 kV on the medium-voltage distribution side, while on the high-voltage transmission side, they remain in the stage of laboratory research and prototype validation. The table below clearly illustrates the current status of voltage levels across different appliEcho11/03/2025 -
Compact Air-Insulated RMUs for Retrofit & New SubstationsAir-insulated ring main units (RMUs) are defined in contrast to compact gas-insulated RMUs. Early air-insulated RMUs used vacuum or puffer-type load switches from VEI, as well as gas-generating load switches. Later, with the widespread adoption of the SM6 series, it became the mainstream solution for air-insulated RMUs. Similar to other air-insulated RMUs, the key difference lies in replacing the load switch with an SF6-encapsulated type—where the three-position switch for load and grounding isEcho11/03/2025 -
Standards and Calculation of LTAC Test for Power Transformers1 IntroductionAccording to the provisions of the national standard GB/T 1094.3-2017, the primary purpose of the line terminal AC withstand voltage test (LTAC) for power transformers is to evaluate the AC dielectric strength from the high-voltage winding terminals to ground. It does not serve to assess inter-turn insulation or phase-to-phase insulation.Compared with other insulation tests (such as full lightning impulse LI or switching impulse SI), the LTAC test imposes a relatively more stringenOliver Watts11/03/2025 -
Climate-Neutral 24kV Switchgear for Sustainable Grids | Nu1Expected service life of 30–40 years, front access, compact design equivalent to SF6-GIS, no SF6 gas handling – climate-friendly, 100% dry air insulation. The Nu1 switchgear is metal-enclosed, gas-insulated, featuring a withdrawable circuit breaker design, and has been type-tested according to relevant standards, approved by the internationally recognized STL laboratory.Compliance Standards Switchgear: IEC 62271-1 High-voltage switchgear and controlgear – Part 1: Common specifications for alternEdwiin11/03/2025 -
Busbar-Side Grounding for 24kV Eco-Friendly RMUs: Why & HowSolid insulation assistance combined with dry air insulation is a development direction for 24 kV ring main units. By balancing insulation performance and compactness, the use of solid auxiliary insulation allows passing insulation tests without significantly increasing phase-to-phase or phase-to-ground dimensions. Encapsulation of the pole can address the insulation of the vacuum interrupter and its connected conductors.For the 24 kV outgoing busbar, with the phase spacing maintained at 110 mm,Dyson11/03/2025 -
How Vacuum Tech Replaces SF6 in Modern Ring Main UnitsRing main units (RMUs) are used in secondary power distribution, directly connecting to end-users such as residential communities, construction sites, commercial buildings, highways, etc.In a residential substation, the RMU introduces 12 kV medium voltage, which is then stepped down to 380 V low voltage through transformers. The low-voltage switchgear distributes electrical energy to various user units. For a 1250 kVA distribution transformer in a residential community, the medium-voltage ring mJames11/03/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
