Technical Solution: RW Series Vacuum Pressure Impregnation (VPI) Dry-Type Transformers
Rockwill
17yrs 700++
staff 108000m²+m² US$150,000,000+ China
Technical Solution: RW Series Vacuum Pressure Impregnation (VPI) Dry-Type Transformers
I. Core Technological Innovations
- Defect-Free Insulation System
- Utilizes Vacuum Pressure Impregnation (VPI) process to cast high-density epoxy resin, achieving void-free solidified insulation.
- Partial discharge levels stably controlled at <10 pC (IEC 60076-11 standard).
- Insulation thermal class reaches Class H (180°C), with insulation performance degradation rate ≤5% throughout the lifespan.
- Robust Environmental Adaptability Structure
- Integrated casting and sealing technology, achieving IP54 protection (resists persistent dust ingress and water splashing from all directions).
- Flame-retardant grade F1 (per GB/T 2207 standard testing, no sustained combustion under 900°C open flame).
- Wide operating temperature range: -25°C to +40°C (no derating required in areas at ≤1000m altitude).
- Energy Efficiency Optimization Design
- ≥15% reduction** in no-load losses for SCBH15/SCB14 series compared to GB 20052 energy efficiency standard.
- Measured data (1000kVA): No-load loss ≤0.40kW, Load loss ≤7.8kW.
- Dynamic load loss optimization technology, achieving efficiency ≥98.5% within the 35%~100% load range.
- Intelligent Maintenance System
- Embedded PT100 platinum resistors in windings (IEC 60751 Class A accuracy, temperature measurement error ±1°C).
- Supports Modbus RTU/TCP protocols. Enables via IoT gateway:
- Real-time winding hot-spot temperature monitoring.
- Three-phase unbalance analysis.
- Dynamic load-rate energy efficiency assessment.
II. Scenario-Based Application Advantages
|
Application Scenario |
Core Problem Solved |
Technical Implementation Path |
|
General Industry |
Metal dust erosion; Frequent equipment starts/stops |
IP54 housing seal + VPI pollution-resistant structure |
|
Commercial Complexes |
Stringent fire codes; Compact space |
F1 flame-retardant grade + Compact design (28% footprint reduction) |
|
Data Centers |
Harmonic pollution (THDi ≤8%); Require 7×24 stable power |
Anti-harmonic magnetic circuit design + ±2°C temperature control accuracy |
III. Life Cycle Cost Optimization
|
Parameter |
Oil-Immersed Transformer |
This Solution |
Benefit Comparison |
|
Maintenance Cycle |
Every 2 years |
Maintenance-free |
Saves ￥40k/year in maintenance |
|
Failure Rate |
0.8 per 1000 units/year |
0.2 per 1000 units/year |
60% reduction in downtime losses |
|
Residual Value (20 yrs) |
30% |
55% |
25% increase in asset value |
|
Total Cost of Ownership |
Benchmark |
30% lower |
|
|
(Validated by TCO Model) |
IV. Engineering Validation Data
- Accelerated Aging Test: Continuous operation for 5000 hours at 40°C/85% RH; Insulation resistance maintained ≥1000 MΩ.
- Seismic Performance: Passed Class II seismic test per GB/T 13540 standard (horizontal acceleration 0.3g).
- Noise Control: ≤55 dB(A) noise level during operation at 1000kVA load (measured at 1m distance).
07/04/2025
Recommended
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System
Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation Plan
Issue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, acceler
Dedicated Vacuum Contactor Solution for Port Shore Power Systems
I. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:
Vacuum Contactor Industrial Power Control Solutions
Application Background and Pain Point AnalysisIn modern industrial manufacturing power control systems, traditional contactors exhibit significant limitations under specific operating conditions:• Frequent Start-Stop Operations: Traditional contactors have limited mechanical lifespan, with frequent operations leading to coil burnout and mechanical jamming.• Poor Adaptability to Harsh Environments: Contacts are prone to oxidation in dusty environments, resulting in increased contact
About
Rockwill
Wenzhou Rockwill Electric Co., Ltd.
17yrs 700++
staff 108000m²+m² US$150,000,000+ China
