Can you list the different types of voltages?

Encyclopedia

Field: Encyclopedia

China

Classified by power supply type

Alternating current voltage
Dc voltage

Classification by waveform

Sine wave voltage
Square-wave voltage
Triangular wave voltage
Sawtooth voltage

Classification by voltage level

Low pressure
Medium voltage
High tension

Classified by application field

Industrial voltage
Medical voltage
Consumer electronic voltage
Military voltage

Classification by use

Power voltage
Illumination voltage
Signal voltage
Heating voltage

Classified by stability or not

Stabilized voltage
Unregulated voltage

Sum up

Voltages can be classified according to different criteria, including power supply type, waveform, voltage level, application field, purpose, and whether they are stable. Each voltage type has its own specific application scenarios and technical requirements. Understanding the different types of voltages helps to correctly select and use the appropriate power supply and equipment in practical applications.

Give a tip and encourage the author!

Topics:

Basic

Basic Electrical

Voltage

About experts

Encyclopedia

China

Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I

Vziman

01/29/2026

Understanding Transformer Neutral Grounding

I. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit

Vziman

01/29/2026

High Voltage Bushing Selection Standards for Power transformer

1. Structure Forms and Classification of BushingsThe structure forms and classification of bushings are shown in the table below: Serial No. Classification Feature Category 1 Main insulation structure Capacitive Type Resin-impregnated paperOil-impregnated paper Non-capacitive Type Gas insulationLiquid insulationCasting resinComposite insulation 2 External Insulation Material PorcelainSilicone Rubber 3 Filling Material Between Capacitor Core and Exte

James

12/20/2025

Chinese Gas-Insulated Switchgear Enables Commissioning of Longdong-Shandong ±800kV UHV DC Transmission Project

On May 7, China's first large-scale integrated wind-solar-thermal-storage comprehensive energy base UHV transmission project—the Longdong~Shandong ±800kV UHV DC transmission project—was officially energized and put into operation. The project has an annual transmission capacity exceeding 36 billion kilowatt-hours, with new energy sources accounting for more than 50% of the total. After commissioning, it will reduce carbon dioxide emissions by approximately 14.9 million tons annually, contributin

Baker

12/13/2025

Can you list the different types of voltages?

About experts

Recommended

About experts