• Product
  • Suppliers
  • Manufacturers
  • Solutions
  • Free tools
  • Knowledges
  • Experts
  • Communities
Search


Safety Rules for Overhead Lines

Electrical4u
Electrical4u
Field: Basic Electrical
0
China

Safety Rules For Overhead Lines

  • Nobody should climb any tower carrying live overhead conductors.

  • Cows or other domestic animals should not be tied with any tower legs and stay wires.

  • Nobody should be allowed to throw any metallic strip, metallic wire, ropes and green twinges to the live over head lines.

  • If any conductor is snapped or dangling from the tower, should not be touched without proper shutdown and temporary earthing arrangement. In this case nobody should be allowed to come closer to the snapped or hanged conductor until the entire circuit is isolated and earthed from both ends substations. In additions to that the snapped conductors should also be locally temporarily earthed with proper earthing rod before touching it for repairing work.

  • If we see any sparking on the live conducting parts of over head system, we should immediately inform to the concerned authority.

  • We should not put any temporary or permanent bands or embankments under the live over head line which is causes reduction in ground clearance of the Overhead line.

  • We should not carry any long metallic poles, bamboos, pipes etc below the live conductors. Farming just below the over head electrical lines are allowed but cultivation of sugarcanes like plants h be avoided if those grow above 5 meters height.

  • Over loaded bullock carts, tractors trail or similar kind of vehicle with height more than 5 meters from ground level should not cross any live over head lines.

  • Any building either temporary or permanent should not be constructed below the over head line. Not only below the over head lines, the building should also be constructed well away from the line by following standard electrical clearance rules of the country.

  • We should not touch any over head tower body during rain.

  • We should keep sufficient safe distance from the over head line during stormy weather. During storm, any line conductor or tower may accidentally fall on us.


Give a tip and encourage the author!
Recommended
THD Measurement Error Standards for Power Systems
THD Measurement Error Standards for Power Systems
Error Tolerance of Total Harmonic Distortion (THD): A Comprehensive Analysis Based on Application Scenarios, Equipment Accuracy, and Industry StandardsThe acceptable error range for Total Harmonic Distortion (THD) must be evaluated based on specific application contexts, measurement equipment accuracy, and applicable industry standards. Below is a detailed analysis of key performance indicators in power systems, industrial equipment, and general measurement applications.1. Harmonic Error Standar
Edwiin
11/03/2025
Busbar-Side Grounding for 24kV Eco-Friendly RMUs: Why & How
Busbar-Side Grounding for 24kV Eco-Friendly RMUs: Why & How
Solid insulation assistance combined with dry air insulation is a development direction for 24 kV ring main units. By balancing insulation performance and compactness, the use of solid auxiliary insulation allows passing insulation tests without significantly increasing phase-to-phase or phase-to-ground dimensions. Encapsulation of the pole can address the insulation of the vacuum interrupter and its connected conductors.For the 24 kV outgoing busbar, with the phase spacing maintained at 110 mm,
Dyson
11/03/2025
How Vacuum Tech Replaces SF6 in Modern Ring Main Units
How Vacuum Tech Replaces SF6 in Modern Ring Main Units
Ring main units (RMUs) are used in secondary power distribution, directly connecting to end-users such as residential communities, construction sites, commercial buildings, highways, etc.In a residential substation, the RMU introduces 12 kV medium voltage, which is then stepped down to 380 V low voltage through transformers. The low-voltage switchgear distributes electrical energy to various user units. For a 1250 kVA distribution transformer in a residential community, the medium-voltage ring m
James
11/03/2025
What Is THD? How It Affects Power Quality & Equipment
What Is THD? How It Affects Power Quality & Equipment
In the field of electrical engineering, the stability and reliability of power systems are of paramount importance. With the advancement of power electronics technology, the widespread use of nonlinear loads has led to an increasingly serious problem of harmonic distortion in power systems.Definition of THDTotal Harmonic Distortion (THD) is defined as the ratio of the root mean square (RMS) value of all harmonic components to the RMS value of the fundamental component in a periodic signal. It is
Encyclopedia
11/01/2025
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.