What is Metal Oxide Surge Arrester？
What is Metal Oxide Surge Arrester？
Definition：An arrester that utilizes zinc oxide semiconductor as its resistor material is called a metal oxide surge arrester or ZnO Diverter. This type of arrester offers protection against all kinds of AC and DC over - voltages. It is primarily employed for over - voltage protection at all voltage levels within a power system.
Construction & Working of Metal Oxide Surge Arrester：Zinc oxide is an N - type semiconducting material. It is pulverized into a fine - grained state. More than ten doping materials, in the form of fine powders of insulating oxides such as Bismuth (Bi₂O₃), Antimony Trioxide (Sb₂O₃), Cobalt Oxide (CoO), Manganese Oxide (MnO₂), and Chromium Oxide (Cr₂O₃), are added. The powder mixture undergoes certain treatment processes and is then spray - dried to yield a dry powder.
Subsequently, the dry powder is compressed into disc - shaped blocks. These blocks are sintered to obtain a dense poly - crystalline ceramic. The metal oxide resistor disc is coated with a conducting compound to safeguard the disc from adverse environmental impacts.
The conducting coating not only provides proper electrical contacts but also ensures uniform current distribution across the disc. Subsequently, the disc is enclosed within a porcelain housing that is filled with either nitrogen gas or SF6 gas. Silicon rubber is employed to fix the disc in place and also aids in transferring heat from the disc to the porcelain housing. The disc is maintained under pressure using appropriate springs.
The ZnO element in the diverter replaces the need for series spark gaps. Voltage drop in a ZnO diverter occurs at the grain boundaries. At the boundary of each ZnO grain, there exists a potential barrier which controls the flow of current from one grain to the next.
Under normal voltage conditions, this potential barrier prevents current from flowing through. However, during over - voltage situations, the barrier breaks down, leading to a sharp transition of the current from an insulating state to a conducting state. As a result, the current starts to flow, and the surge is safely diverted to the ground.
Once the surge has passed, the voltage across the diverters decreases, and the current reduces to a negligible value in the resistor units. Notably, there is no power follow - current.
Advantages of Metal Oxide Surge Arrester
The metal oxide surge arrester offers the following benefits:
Note: Sintering is the process of creating a solid mass of material. This is achieved either by heating the material or by applying pressure to it without melting the material.
