126kV/800kV drum platform components
Key attributes
| Brand | Switchgear parts |
| Model NO. | 126kV/800kV drum platform components |
| Rated voltage | 126/800kV |
| Series | RN |
Product descriptions from the supplier
126kV/800kV cylindrical platform components are key structural parts in high-voltage power equipment, and their design needs to meet insulation, mechanical, and environmental adaptability requirements under high voltage levels. The following is a comprehensive technical analysis:
1、 Design Features and Material Selection
Voltage level difference
126kV cylinder platform components are usually made of epoxy resin composite materials, with a dielectric strength of ≥ 30kV/mm and a local discharge capacity of ≤ 5pC
800kV cylinder platform components require the use of high dielectric constant materials (such as alumina filled epoxy resin) with a dielectric strength of ≥ 50kV/mm, and are insulated with SF6 gas
Structural optimization
The 800kV cylindrical platform needs to adopt a multi-layer composite structure, such as a "metal insulation metal" sandwich design, to suppress electric field distortion
The 126kV cylindrical platform can adopt a single-layer insulation structure, but it is necessary to ensure that the creepage distance is ≥ 3.2mm (pollution level 2)
2、 Performance parameters and validation
Electrical performance
126kV parts have a power frequency withstand voltage of 230kV and a lightning impulse withstand voltage of 550kV; 800kV parts have a power frequency withstand voltage of 800kV and a lightning impulse withstand voltage of 1200kV
The 800kV drum platform needs to pass a 1200V DC/1-minute withstand voltage test with a leakage current of<1mA
Mechanical performance
The maximum deformation of the 126kV drum platform is ≤ 0.45mm, and the interface stress is below 70MPa; The 800kV cylinder platform needs to pass a water pressure test at 1.5 times the rated pressure
3、 Typical Applications and Standards
Application scenarios
126kV tube platform is used for urban substations and industrial power supply systems (such as automobile manufacturing plants)
126-800kV tubular platform for ultra-high voltage transmission projects (such as Gas Insulated Switchgear GlS
Standard specifications
The design must comply with GB/T 11022-2020 "Common Technical Requirements for High Voltage Switchgear and Control Equipment Standards"
800kV components must meet the aging testing requirements for insulation materials in DL/T 246-2006 "Guidelines for Chemical Supervision"
4、 Manufacturing and Testing
Process requirements
The 126kV cylinder platform can use vacuum casting technology, while the 800kV cylinder platform requires 3D printing and gradient material composite technology
800kV parts require X-ray inspection for laminated defects
Environmental friendliness
800kV cylinder platform needs to reduce SF6 gas consumption by 15%, in line with the environmental protection requirements of the "Guiding Catalogue for the First Batch of Application Demonstrations of Key New Materials"
Note: Customization with drawings is available
Related Products
-
RNV-B1-12 GIS Sf6 Break Switch Circuit Breaker for Gas Insulated Switchgear
-
RNN-12 630A SF6 Gas Insulated Load Isolation Switch
-
RNN-12 SF6 Gas Insulated Load Isolation Switch (with Grounding)
-
RNV-A1-12D-1250A SF6 High Voltage Gas Insulated Inflatable Cabinet Circuit Breaker
-
24kV GIS Sf6 Break Switch Circuit Breaker for Gas Insulated Switchgear
-
24kV SF6 gas insulated load isolation switch (three position with isolation)
-
40.5kV Manual Operation Mechanism for Spring-Loaded Inlet of SF6 Gas-Insulated Switchgear
Related Knowledges
-
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026 -
What’s the Difference Between Rectifier Transformers and Power Transformers?What is a Rectifier Transformer?"Power conversion" is a general term encompassing rectification, inversion, and frequency conversion, with rectification being the most widely used among them. Rectifier equipment converts input AC power into DC output through rectification and filtering. A rectifier transformer serves as the power supply transformer for such rectifier equipment. In industrial applications, most DC power supplies are obtained by combining a rectifier transformer with rectifier equ01/29/2026
