6kV 6.35kV 7.62kV 13.2kV 13.8kV 14.4 kV Overhead Line Single Phase Automatic Step Voltage Regulator
Key attributes
| Brand | ROCKWILL |
| Model NO. | 6kV 6.35kV 7.62kV 13.2kV 13.8kV 14.4 kV Overhead Line Single Phase Automatic Step Voltage Regulator |
| Rated voltage | 33kV |
| Phases | Single-phase |
| Series | RVR |
Product descriptions from the supplier
Overview
The RVR-1 Feeder Automatic Voltage Regulator is a single-phase, oil-immersed autotransformer equipped with an advanced RVR controller and an on-load tap changer (OLTC). Designed to optimize grid efficiency, it dynamically adjusts voltage levels by monitoring and sampling voltage/current signals, enabling precise load management through step-by-step voltage increments ("boost") or decrements ("buck").
Key Features
Voltage Regulation
±10% voltage adjustment range (32 steps of 0.625% per step).
Rated for 2,400 V (60 kV BIL) to 34,500 V (200 kV BIL), compatible with 50 Hz and 60 Hz systems.
Smart Controller Technology
Built-in RVR controller with GPRS/GSM and Bluetooth connectivity for remote monitoring and control.
Self-developed algorithms for real-time voltage/current data acquisition and adaptive adjustments.
Integrated Protection Functions
Lockout mechanisms for fault conditions: line fault, overload, overcurrent, and under-voltage.
Adjustable settings: voltage reference, step range limits, transition delays, and system parameters.
Rugged Construction
On-load tap changer with motorized drive, current/voltage transformers, and limit switches.
High-creepage porcelain bushings and MOV-type surge arresters for enhanced insulation and surge protection.
Standard Features
Operational Components:
Tap position indicator with ADD-AMP adjustment.
Motorized tap changer with dedicated power supply.
Control cabinet with removable front panel and conformal-coated circuit boards.
Safety & Maintenance:
Oil drain valve with integrated sampling port.
Pressure relief device and oil sight gauge for condition monitoring.
Lifting lugs and corrosion-resistant nameplates for easy installation and identification.
Applications: Ideal for utility distribution networks, industrial facilities, and renewable energy systems requiring stable voltage regulation under dynamic load conditions.
Technical Parameters
Some of the voltage ratings include:50Hz: 6kV, 6.35kV, 11kV, 15kV, 22kV, 33kV60Hz: 7.62kV, 13.2kV 13.8kV, 14.4kV, 19.92kV, 34.5kVCustomization is available.
Parameter |
Specification |
Model No. |
RVR |
Product Type |
Single Phase 32-Step Voltage Regulator |
Voltage Ratings |
6kV 6.35kV 7.62kV 13.2kV 13.8kV 14.4 kV |
Transformer Type |
Core-type, oil-immersed autotransformer |
Cooling Method |
Oil-immersed |
Winding Type |
Auto-transformer |
Frequency Characteristics |
Power Frequency (50 Hz / 60 Hz) |
Core Shape |
U-shaped core |
Brand |
Rockwell |
Material |
Oil, Copper |
Color |
Gray, Green, or Customized |
Standards |
IEC / ANSI / GB |
Certification |
ISO9001-2000 |
Origin |
China |
Transport Package |
Wooden |
Production Capacity |
1000 units/year |
HS Code |
8504220000 |
Voltage (kV) |
Current (A) |
Capacity (kVA) |
BIL (kV) |
Power Frequency Withstand Voltage (kV) |
Insulation Class |
6/6.35 |
50 |
30/32 |
75/95 |
28 |
A |
100 |
60/64 |
||||
150 |
90/95 |
||||
200 |
120/127 |
||||
300 |
180/191 |
||||
400 |
240/254 |
||||
500 |
300/318 |
||||
600 |
360/381 |
||||
11 |
50 |
55 |
|||
100 |
110 |
||||
150 |
165 |
||||
200 |
220 |
||||
300 |
330 |
||||
400 |
440 |
||||
500 |
550 |
||||
600 |
660 |
||||
15 |
50 |
75 |
125/150 |
50 |
|
100 |
150 |
||||
150 |
225 |
||||
200 |
300 |
||||
300 |
450 |
||||
400 |
600 |
||||
500 |
750 |
||||
22 |
50 |
110 |
|||
100 |
220 |
||||
150 |
330 |
||||
200 |
440 |
||||
300 |
660 |
||||
33 |
50 |
165 |
170/200 |
70 |
|
100 |
330 |
||||
150 |
495 |
||||
200 |
660 |
||||
250 |
825 |
||||
300 |
990 |
Voltage (kV) |
Current (A) |
Capacity (kVA) |
BIL (kV) |
Power Frequency Withstand Voltage (kV) |
Insulation Class |
7.62 |
50 |
38 |
60/75 |
20 |
A |
100 |
76 |
||||
150 |
114 |
||||
219 |
167 |
||||
328 |
250 |
||||
438 |
333 |
||||
546 |
416 |
||||
13.8 |
50 |
69 |
95/125 |
38 |
|
100 |
138 |
||||
150 |
207 |
||||
200 |
276 |
||||
300 |
414 |
||||
400 |
552 |
||||
14.4 |
50 |
72 |
|||
100 |
144 |
||||
200 |
288 |
||||
300 |
432 |
||||
400 |
576 |
||||
19.92 |
50 |
100 |
170/200 |
70 |
|
100 |
200 |
||||
167 |
333 |
||||
200 |
400 |
||||
335 |
667 |
||||
34.5 |
50 |
165 |
|||
100 |
330 |
||||
150 |
495 |
||||
200 |
660 |
Related Products
-
6.35kV 13.2kV 14.4kV 22kV 33kV Oil-immersed self-cooled induction voltage regulator source manufacturer
-
13.2kV 14.4kV 19.92 kV 33kV 34.5 kV Single Phase Pole Mounted voltage regulator control for Precise output voltage regulation
-
13.2kV 13.8kV 14.4kV 19.92kV IEC Standard voltage regulator control compliant for Industrial Manufacturing Industry
-
Automatic Tap - Changing Voltage Regulator – 7.62 kV 11kV 13.8 kV 14.4 kV 19.92 kV 34.5 kV, IEEE compliant for Power Industry
-
Continuous / Step voltage regulation step voltage regulator 6kV 6.35kV 11kV 15kV 22kV 33kV – IEEE
-
Voltage stabilization and compensation overhead voltage regulator 6kV 6.35kV 11kV 15kV 22kV 33kV – IEEE for Power Industry
-
Single Phase Automatic Voltage Regulator – 7.62 kV 13.8 kV 14.4 kV 19.92 kV 34.5 kV IEC 60076 compliant for Power Industry
Related Knowledges
-
Impact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesImpact of DC Bias in Transformers at Renewable Energy Stations Near UHVDC Grounding ElectrodesWhen the grounding electrode of an Ultra-High-Voltage Direct Current (UHVDC) transmission system is located close to a renewable energy power station, the return current flowing through the earth can cause a rise in ground potential around the electrode area. This ground potential rise leads to a shift in the neutral-point potential of nearby power transformers, inducing DC bias (or DC offset) in their01/15/2026 -
HECI GCB for Generators – Fast SF6 Circuit Breaker1.Definition and Function1.1 Role of the Generator Circuit BreakerThe Generator Circuit Breaker (GCB) is a controllable disconnect point located between the generator and the step-up transformer, serving as an interface between the generator and the power grid. Its primary functions include isolating generator-side faults and enabling operational control during generator synchronization and grid connection. The operating principle of a GCB is not significantly different from that of a standard c01/06/2026 -
Distribution Equipment Transformer Testing, Inspection, and Maintenance1.Transformer Maintenance and Inspection Open the low-voltage (LV) circuit breaker of the transformer under maintenance, remove the control power fuse, and hang a “Do Not Close” warning sign on the switch handle. Open the high-voltage (HV) circuit breaker of the transformer under maintenance, close the grounding switch, fully discharge the transformer, lock the HV switchgear, and hang a “Do Not Close” warning sign on the switch handle. For dry-type transformer maintenance: first clean the porcel12/25/2025 -
How to Test Insulation Resistance of Distribution TransformersIn practical work, insulation resistance of distribution transformers is generally measured twice: the insulation resistance between thehigh-voltage (HV) windingand thelow-voltage (LV) winding plus the transformer tank, and the insulation resistance between theLV windingand theHV winding plus the transformer tank.If both measurements yield acceptable values, it indicates that the insulation among the HV winding, LV winding, and transformer tank is qualified. If either measurement fails, pairwise12/25/2025 -
Design Principles for Pole-Mounted Distribution TransformersDesign Principles for Pole-Mounted Distribution Transformers(1) Location and Layout PrinciplesPole-mounted transformer platforms should be located near the load center or close to critical loads, following the principle of “small capacity, multiple locations” to facilitate equipment replacement and maintenance. For residential power supply, three-phase transformers may be installed nearby based on current demand and future growth projections.(2) Capacity Selection for Three-Phase Pole-Mounted Tr12/25/2025 -
Transformer Noise Control Solutions for Different Installations1.Noise Mitigation for Ground-Level Independent Transformer RoomsMitigation Strategy:First, conduct a power-off inspection and maintenance of the transformer, including replacing aged insulating oil, checking and tightening all fasteners, and cleaning dust from the unit.Second, reinforce the transformer foundation or install vibration isolation devices—such as rubber pads or spring isolators—selected based on the severity of vibration.Finally, strengthen sound insulation at weak points of the ro12/25/2025
Related Solutions
-
Intelligent Operation Solution for 12kV Vacuum Circuit Breakers: Integrating Real-time Monitoring & Lifetime OptimizationⅠ. Equipment Operation & MaintenanceIntelligent Monitoring System IntegrationMulti-parameter Real-time Monitoring: Embedded sensors (temperature, displacement, Hall effect current sensors) track contact temperature rise, mechanical characteristics (opening/closing speed, overtravel), coil current, and partial discharge signals. Data undergoes preprocessing via edge computing prior to cloud upload.Lifetime Prediction Model: Dynamically evaluates remaining lifespan using electrical wear data06/10/2025 -
SF6 Circuit Breaker Solutions for Outdoor Installation (Anti-Pollution & Seismic Resistance)I.Core Challenges in Outdoor InstallationIn high-voltage transmission and distribution systems, SF6 circuit breakers are exposed to complex outdoor environments for extended periods, facing the following critical issues:Pollution & Insulation DegradationDust, salt fog, and industrial pollutants in outdoor environments easily adhere to equipment surfaces. In coastal or industrial areas, pollution levels may reach Class IV, resulting in insufficient creepage distance and triggering flasho05/12/2025 -
12kV Indoor Vacuum Circuit Breaker Southeast Asia Solution: Anti-Corrosion Compact Design12kV Indoor Vacuum Circuit Breaker Southeast Asia Solution: Anti-Corrosion Compact DesignⅠ. Executive SummarySoutheast Asia faces rapidly growing electricity demand alongside environmental challenges including high temperatures, humidity, salt spray corrosion, and grid instability. This solution recommends Solid Insulated Pole-Mounted Vacuum Circuit Breakers (VCB) featuring high reliability, compact design, and smart monitoring. Tailored for tropical climates and industrial scenarios, it06/10/2025
