DNH1-160/21GR 2P fused switch
Key attributes
| Brand | Switchgear parts |
| Model NO. | DNH1-160/21GR 2P fused switch |
| Rated voltage | AC 400V |
| Rated normal current | 160A |
| Rated frequency | 50/60Hz |
| Series | DNH1 |
Product descriptions from the supplier
DNH1 series fuse-switch-disconnector (chere inafter refered to switch) is designed for the distribution circuit and electromot of circuit with high short circuit current, with rated AC voltage 400v and 690V, conventional thermal current up to 630A. It is used as power switch, switch disconnector and emergent switch, and with the function of circuit protection, but not used as a direct open or close single electromotor popularly. The low-voltage cabinets that are compatible are mostly concentrated in industrial and civilian power distribution scenarios, as follows: GGJ single-phase/small compensation cabinets, small power distribution cabinets, comprehensive distribution boxes (JP cabinets), civilian/small industrial JP cabinets,
This product is in conformity with standard GB14048.3(idt IEC60947-3).
Main technical parameters
technical parameter |
specifications | DNH1-250 | DNH1-160 | |||||
| Rated working voltage | Ue | V | AC400 | AC690 | AC400 | AC690 | ||
| Rated working current | Ie | A | 250 | 200 | 160 | 100 | ||
| Agreed heating current | Ith | A | 250 | 200 | 160 | 100 | ||
| Rated limited short-circuit current (with fused core) | KA | 100 | 50 | 100 | 50 | |||
| Usage category (with fused core) | AC-23B | AC-23B | AC-23B | AC-23B | ||||
| Rated insulation voltage | Ui | V | AC1000 | AC1000 | AC1000 | AC1000 | ||
| Rated impulse withstand voltage | Uimp | KV | 12 | 12 | 12 | 12 | ||
| Rated frequency | Hz | 50/60 | 50/60 | 50/60 | 50/60 | |||
| Electrical life (number of cycles) | times | 200 | 200 | 200 | 200 | |||
| Maximum torque | N.m | 30 | 30 | 20 | 20 | |||
|
Fusible core |
Executive standards：IEC60269-2/GB/T 13539.2 | 1 | 1 | 00 | 00 | |||
| Rated working current | In | A | 200 | 200 | 160 | 100 | ||
| power dissipation | Pn | W | 23 | 32 | 12 | 12 | ||
| Normal use, installation, and transportation conditions | Ambient air temperature | -5℃~+40℃ | ||||||
| Altitude | ≤2000m | |||||||
| Installation category and pollution level | Ⅲ、Ⅳ | 3 | ||||||
| Transportation and Storage | -25℃~+55℃ | |||||||
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Low Voltage Electrical Apparatus/Instrument meters/Production equipment/Tester/High Voltage Electrical Apparatus/Electrical fittings/Equipment Parts
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
160-250A DNH40 Series Disconnector Switch
-
315-400A DNH40 Series Disconnector Switch
-
3200-4000A DNH40 series isolator switches
-
2000-2500A DNH40 Series Disconnector Switch
-
630-800A DNH40 Series Disconnector Switch
-
HH15 series Disconnector fuse group and disconnector
-
Disconnector Fuse Group HGLR Series, Fuse Switch Disconnector
Related Knowledges
-
High Voltage Bushing Selection Standards for Power transformer1. Structure Forms and Classification of BushingsThe structure forms and classification of bushings are shown in the table below: Serial No. Classification Feature Category 1 Main insulation structure Capacitive Type Resin-impregnated paperOil-impregnated paper Non-capacitive Type Gas insulationLiquid insulationCasting resinComposite insulation 2 External Insulation Material PorcelainSilicone Rubber 3 Filling Material Between Capacitor Core and Exte12/20/2025 -
Large Power Transformer Installation & Handling Procedures Guide1. Mechanical Direct Towing of Large Power TransformersWhen large power transformers are transported using mechanical direct towing, the following work shall be properly completed:Investigate the structure, width, gradient, slope, inclination, turning angles, and load-bearing capacity of roads, bridges, culverts, ditches, etc. along the route; reinforce them when necessary.Survey overhead obstacles along the route such as power lines and communication lines.During loading, unloading, and transpo12/20/2025 -
5 Fault Diagnosis Techniques for Large Power TransformersTransformer Fault Diagnosis Methods1. Ratio Method for Dissolved Gas AnalysisFor most oil-immersed power transformers, certain combustible gases are produced in the transformer tank under thermal and electrical stress. The combustible gases dissolved in oil can be used to determine the thermal decomposition characteristics of the transformer oil-paper insulation system based on their specific gas content and ratios. This technology was first used for fault diagnosis in oil-immersed transformers.12/20/2025 -
17 Common Questions About Power Transformers1 Why must the transformer core be grounded?During normal operation of power transformers, the core must have one reliable ground connection. Without grounding, a floating voltage between the core and ground would cause intermittent breakdown discharge. Single-point grounding eliminates the possibility of floating potential in the core. However, when two or more grounding points exist, uneven potentials between core sections create circulating currents between grounding points, causing multi-poi12/20/2025 -
Intelligent Grounding Transformers for Island Grid Support1. Project BackgroundDistributed photovoltaic (PV) and energy storage projects are developing rapidly across Vietnam and Southeast Asia, yet face significant challenges:1.1 Grid Instability:Vietnam's power grid experiences frequent fluctuations (particularly in northern industrial zones). In 2023, coal power shortages triggered large-scale blackouts, resulting in daily losses exceeding USD 5 million. Traditional PV systems lack effective neutral grounding management capabilities, making equipmen12/18/2025 -
Commissioning Test Procedures for Oil-Immersed Power TransformersTransformer Testing Procedures and Requirements1. Non-Porcelain Bushing Tests1.1 Insulation ResistanceSuspend the bushing vertically using a crane or support frame. Measure the insulation resistance between the terminal and the tap/french using a 2500V megohmmeter. The measured values should not significantly deviate from factory values under similar environmental conditions. For capacitive-type bushings rated 66kV and above with tap bushings, measure the insulation resistance between the "small12/17/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
