KWJD-2F Series Changing/Dischanging Tester - IEE-Business

English
RFQ

Download the app

KWJD-2F Series Changing/Dischanging Tester

discuss personally

Model

Basic info Product Detail Supplier

Basic info

Brand	Wone Store
Model NO.	KWJD-2F Series discharging test device
Rated voltage	220V
Series	KWJD-2F Series

Product Detail

Overview

The KWJD-2F is designed and developed in accordance with GB/T 15576 - 2020 Low - voltage assembled reactive power compensation devices. The equipment uses a 10.2 - inch color touch - screen for operation and display. At the same time, it adopts a programmable PLC for automated control and displays in the form of curves, which is more intuitive, simple and convenient to operate. It is a special device for the discharge test of internal components of capacitors, meeting the discharge test requirements of capacitors in high - voltage assembled reactive power compensation cabinets. It is an essential testing tool for production workshops, laboratories, installation and commissioning, as well as scientific research and development.

This equipment uses a high - voltage DC power supply with advanced PWM control technology as the charging power supply. It has features such as over - voltage and over - current protection, stable current and voltage, fast dynamic response speed, and high precision.

Parameters

Project		Parameters
Power input	Rated voltage	AC 220V±10% 50Hz
	Power Input	2-phase 3-wire
Output voltage		DC 0~1000V
Voltage resolution		1V
Display precision		3%
Changing current		1A（Constant current）
Changing time setting		0~9999s
Discharging time setting		0~9999s
Test time setting		1~9999
Protection		Over-voltage，over-current
IP		IP20
Operating temperature		-10℃-50℃

Know your supplier

Wone Store

Main Categories

High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment/Instrument Transformer/Equipment Parts

Business Type

Sales

Highest Annual Export (USD)

$300000000

Professional Experience

1 years

Workplace

1000m²

占位

占位

Related Knowledges

Common Faults and Diagnostic Technologies of Oil-immersed Distribution Transformers

Common Faults and Diagnostic Technologies of Oil-immersed Distribution Transformers

1.Common Faults and Diagnostic Measures1.1 Transformer Oil Leakage1.1.1 Oil Leakage from Tank Weld SeamsFor oil leakage at flat joints, direct welding is applicable. For leakage at corners or joints reinforced with stiffeners, the exact leakage point is often difficult to locate, and re-leakage may occur after welding due to internal stress. For such cases, repair welding with an added iron plate is recommended: for two-surface joints, the iron plate can be cut into a spindle shape for welding;

Why Should a Transformer Core be Grounded?

Why Should a Transformer Core be Grounded?

During transformer operation, the core and the metallic structures and components that secure the core and windings are exposed to a strong electric field, inducing a high potential relative to ground. If the core is left ungrounded, a potential difference can develop between the core and grounded parts such as clamps and the tank, leading to intermittent discharges. Additionally, the magnetic field surrounding the windings induces varying electromotive forces (EMF) in different metallic compone

Why do resistors typically have values such as 4.7kΩ or 5.1kΩ instead of round numbers like 5kΩ?

Why do resistors typically have values such as 4.7kΩ or 5.1kΩ instead of round numbers like 5kΩ?

Many beginners in circuit design may find standard resistor values puzzling. Why are common values like 4.7 kΩ or 5.1 kΩ instead of round numbers such as 5 kΩ?The reason lies in the use of an exponential distribution system for resistor values, standardized by the International Electrotechnical Commission (IEC). This system defines a series of preferred values, including the E3, E6, E12, E24, E48, E96, and E192 series.For example:The E6 series uses a ratio of approximately 10^(

Analysis of Interlocking Protection Circuit for Furnace Transformer

Analysis of Interlocking Protection Circuit for Furnace Transformer

Currently, the company operates two electric arc furnace (EAF) transformers. The secondary voltage ranges from 121 V to 260 V, with a rated current of 504 A / 12,213 A. The high-voltage side has a total of eight tap positions, utilizing motor-driven off-circuit voltage regulation. The equipment is equipped with a reactor of corresponding capacity, connected in series to designated taps on the high-voltage side. These transformers have been in operation for over 20 years. Throughout this period,

Introduction to Amorphous Alloy Transformers

Introduction to Amorphous Alloy Transformers

Amorphous alloy transformers, developed in the 1970s, represent a new generation of power transformers that utilize amorphous alloys as the core material instead of conventional silicon steel sheets. Compared to silicon steel-core transformers, they reduce no-load losses by approximately 70%–80% and no-load current by about 85%. These transformers are currently among the most energy-efficient distribution transformers available, making them ideal for applications in areas with low load uti

Development of SG-Type Open Ventilated Dry Transformers (OVTD)

Development of SG-Type Open Ventilated Dry Transformers (OVTD)

Prior to the 1960s, dry-type transformers primarily employed Class B insulation in open-ventilated designs, with the product model designated as SG. At that time, foil windings were not yet available, so low-voltage coils were typically constructed using multi-strand conductors in layered or spiral configurations, while high-voltage coils adopted a disc-type design. The conductors used were either double glass-fiber-wrapped wires or single glass-fiber-wrapped wires with alkyd enamel coating.Most