5KW Single Phase Low Voltage Inverter
Key attributes
| Brand | Wone |
| Model NO. | Single Phase Low Voltage Inverter |
| Max PV Array Power | 9000 Wp STC |
| Series | Residential energy storage |
Product descriptions from the supplier
Features
EPS output power goes up to 5kw.
Market leading 10-year warranty.
UPS switch time within 10ms when grid off.
IP66 (dust proof and water proof).
Parameters
What is EPS？
The EPS (Emergency Power Supply) system is a device used to provide emergency power supply when the main power fails. It is mainly used to ensure life safety, maintain the normal operation of key facilities, or provide enough time for personnel to evacuate safely.
EPS is a system that can automatically switch to backup power supply when the main power is lost.
The backup power supply is usually composed of battery packs, diesel generators or other backup power sources.
Working principle：
Normal operation mode:Under normal circumstances, the EPS system is powered by the main power supply. At this time, the charger inside the EPS will charge the backup power supply (such as battery pack).At the same time, the EPS system will regularly check the status of the backup power supply to ensure that it can be put into use immediately when needed.
Switching mode:When the main power supply fails or is cut off, the EPS system will automatically switch to backup power supply.The switching process is usually instantaneous to ensure that critical loads will not be affected by power outages.
Recovery mode:When the main power supply returns to normal, the EPS system will switch back to main power supply again and recharge the backup power supply.
Related Products
-
LFP All-in-One Energy Storage Battery with Inverter & Controller
-
5.12kWh low-voltage wall-mounted lithium battery
-
5-20 kWh AC/ DC / Hybrid-Coupling residential energy storage system
-
Class-A 5.12KWh Low Voltage Energy Storage Battery for Energy Storage System
-
4.8kWh 5.12kWh Commercial Use Stacked energy storage battery
-
9.6KWh/10.24KWh Household Column energy storage battery
-
2.4–10.24 KWh Household Wall - Mounted Energy Storage Battery
Related Knowledges
-
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026 -
What’s the Difference Between Rectifier Transformers and Power Transformers?What is a Rectifier Transformer?"Power conversion" is a general term encompassing rectification, inversion, and frequency conversion, with rectification being the most widely used among them. Rectifier equipment converts input AC power into DC output through rectification and filtering. A rectifier transformer serves as the power supply transformer for such rectifier equipment. In industrial applications, most DC power supplies are obtained by combining a rectifier transformer with rectifier equ01/29/2026
