Solid insulated ring main unit accessories load switch combination switch core (excluding sulfur hexafluoride gas)
Key attributes
| Brand | Switchgear parts |
| Model NO. | Solid insulated ring main unit accessories load switch combination switch core (excluding sulfur hexafluoride gas) |
| Rated voltage | 12kV |
| Rated normal current | 630A |
| Series | RNZH |
Product descriptions from the supplier
The load switch combination switch core is the core control accessory of 12kV/24kV sulfur hexafluoride (SF6) free solid insulated ring main unit. It integrates the dual functions of load switch and combination switch, and plays a key role in circuit on-off, load control, and safety isolation. It is the core component to ensure the stable operation of medium voltage distribution system.
Core Features
Adopting SF6 free pure solid insulation design, environmentally friendly and pollution-free, with no risk of gas leakage, in line with the development trend of green power distribution, and meeting environmental policy requirements.
The transmission mechanism is finely optimized, with rapid response and precise positioning of the opening and closing actions, stable switch characteristics, and the ability to efficiently achieve load current on/off and circuit isolation.
Integrate multiple mechanical and electrical interlocking devices to strictly prevent dangerous behaviors such as misoperation and load operation, in compliance with safety regulations in the power industry.
Compact structure, strong size adaptability, perfectly matches the installation space of solid insulated ring main unit, resistant to aging and vibration, easy maintenance, and long service life.
Applicable scenarios
Suitable for 12kV/24kV SF6 free solid insulated ring main unit, widely used in medium voltage distribution systems such as urban distribution networks, industrial plants, new energy power stations, commercial complexes, etc., suitable for scenarios such as line branch control, load switching, and fault isolation.
Yes, it fully complies with global environmental requirements: ① No SF6 gas is used in the whole structure, avoiding greenhouse gas emissions (SF6 has a GWP value 23,500 times that of CO₂); ② Conforms to EU F-Gas Regulation (Regulation (EU) 2014/527) and international carbon neutrality policies; ③ The solid insulation material (epoxy resin) is recyclable, further reducing environmental impact; ④ It can replace traditional SF6-type switch cores directly, helping power enterprises achieve green transformation
Its core function is to serve as the core control component of solid insulated ring main units (RMU), realizing on/off, load breaking and circuit isolation in medium-voltage power distribution systems, without relying on SF6 gas (environmentally friendly). Working principle: Adopt solid insulation material (epoxy resin) as insulation medium instead of SF6 gas; through manual/electric operation, drive the moving contact and fixed contact to complete circuit switching, and match the combination mechanism to realize linkage control of load switch and isolation function, ensuring reliable power supply and safe maintenance.
Related Products
-
Solid insulated ring main unit accessories isolation switch core PT (without SF6 gas)
-
Solid insulation cabinet lifting cabinet core - D without SF6 gas
-
Special Side-Expanding Bushing for Solid Insulated Switchgear
-
Solid insulated ring main unit accessory adapter busbar
-
Solid insulated ring main unit accessories 260 umbrella shaped sleeve seat
-
Solid insulated ring main unit accessories 234 Bushing
-
Gas insulated switchgear with umbrella skirt double conduit
Related Knowledges
-
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026 -
What’s the Difference Between Rectifier Transformers and Power Transformers?What is a Rectifier Transformer?"Power conversion" is a general term encompassing rectification, inversion, and frequency conversion, with rectification being the most widely used among them. Rectifier equipment converts input AC power into DC output through rectification and filtering. A rectifier transformer serves as the power supply transformer for such rectifier equipment. In industrial applications, most DC power supplies are obtained by combining a rectifier transformer with rectifier equ01/29/2026
