English
RFQ

Download the app

What is Transformer Rating?

Encyclopedia

08/06/2024

What is Transformer Rating?

Transformer Rating Definition

Transformer rating is defined as the voltage and current specified for operation, expressed in VA (Volt-Amps).

Importance of Cooling

The effectiveness of the cooling system impacts the transformer’s rating, with better cooling allowing a higher rating.

Loss Types

Constant losses or core losses – These depend on V
Variable losses or ohmic (I2R) losses – These depend on I

Power Factor Independence

The transformer’s rating in kVA is independent of the load’s power factor since losses do not depend on it.

Apparent Power Rating in kVA

Transformers are rated in kVA, not kW, to account for the combination of voltage and current without considering power factor.

Topics

Machines Transformers Transformer Rating

Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil

Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil

For users, when purchasing a 35kV new energy transformer, choosing between dry-type, mineral oil-filled, or vegetable oil-filled types involves multiple considerations. These include user habits, maintenance-free performance, safety and fire resistance, volume and weight, among others. However, cost differences are undoubtedly one of the most crucial factors.To illustrate the issue intuitively, this paper selects a three-level energy efficiency dual-winding new energy transformer with a rated ca

What is the connection group of a transformer?

What is the connection group of a transformer?

Transformer Connection GroupThe connection group of a transformer refers to the phase difference between the primary and secondary voltages or currents. It is determined by the winding directions of the primary and secondary coils, the labeling of their start and end terminals, and the connection mode. Expressed in a clock-like format, there are 12 groups in total, numbered from 0 to 11.The DC method is commonly used to measure the transformer's connection group, mainly to verify whether the con

What is the sequence for powering down the transformer?

What is the sequence for powering down the transformer?

The sequence for shutting down a main transformer is as follows: when de-energizing, the load side should be shut down first, followed by the power supply side. For energizing operations, the reverse order applies: the power supply side is energized first, then the load side. This is because: Energizing from the power supply side to the load side makes it easier to identify the fault range and take prompt judgment and handling measures in case of a fault, preventing the fault from spreading or e

What are the methods for switching operations of station transformers?

What are the methods for switching operations of station transformers?

Let's take an auxiliary power system with two station transformers as an example. When one station transformer needs to be out of service, there are two operation methods: non-interruptive power supply and instantaneous power interruption. Generally, the method of instantaneous power interruption on the low-voltage side is preferred.The operation method for instantaneous power interruption on the low-voltage side is as follows:Open the 380V power incoming circuit breaker of the corresponding sec

Source professional electrical partners, experts, and explore smart grid & energy solutions.