Solar Energy System | History of Solar Energy

Electrical4u
03/20/2024

WechatIMG1810.jpeg

Solar Energy System

Solar energy is the light and radiant heat from the Sun that control Earth’s climate and weather and protract life. It is a renewable source of energy and originates with the thermonuclear process that transfers about 650,000,000 tons of hydrogen to helium per second. This action produces lots of heat and electromagnetic radiation. The produced heat remains in the sun and is helpful in upholding the thermonuclear reaction and electromagnetic radiation together with visible, infrared and ultra-violet radiation flow out into space in all directions. Solar energy is in reality nuclear energy. Similar to all stars, the sun is a large gas sphere made up mostly of hydrogen and helium gas. In the internal surface of sun 25% of hydrogen is fusing into helium at a rate of about 7 × 1011 kg of hydrogen per second.

Heat from the center is first and foremost spread out, and then sends down, to the Sun surface, where it keeps up at a temperature of 5800 K. According to Stefan-Boltzmann’s Law, the total energy that is released by the Sun, and therefore, the quantity of solar energy that we get here on Earth, is significantly reliant upon this surface temperature. Now a day’s solar energy system play an important role in the field of producing electricity or other domestic uses like water heating, cooking etc. As we know that major part of generated electricity or electricity depends upon coal which is used in thermal power plant (in In India 65% of total power is generated by the thermal power plant). But the main problem is here that the fuel used in thermal power plant is coal which is in limited amount and may be not available in future to produce or generate electricity. That is the main reason to solar energy system comes to the picture.

Solar energy system is the pollution free source of energy and always available because, sun is the single source of solar energy (also known as renewable energy or non conventional energy) which sits at the central point of solar system and radiate energy at an tremendously huge and fairly constant rate, per day per year as the form of electromagnetic radiation. Sun contained huge amount of energy but the whole energy not utilized at earth due to some reason like-

  • Earth is revolve at about its polar axis.

  • Atmospheric reason of earth.

  • Earth is relocate from the sun.

But the main thing is that after these obstacles sun energy reach to earth is sufficient to produce or generate electricity which is polluted free. Due to this consideration somewhat we reduce the use of Thermal Power Plant, Gas Power Plant etc and reserve the non renewable energy sources like coal, petroleum etc for future. In recent years solar energy system is rise as a primary source of energy that converted into electricity and almost all country in the world utilize maximum solar energy to produce electricity and this is very less costly.
The main benefit of solar energy system is that the sun light is present everywhere free of cost. To produce electricity or convert solar energy to other form of energy first we invest heavy amount for solar panel that convert solar energy to other form but the main advantage is after that installation no any type of maintenance is required for 40 to 50 years.

History of Solar Energy

First solar collector created by Swiss scientist named Horace-Benedict de Saussure in 1767, he take an insulated box enclosed with three layers of glass which suck up heat energy. After that Saussure’s box became famous and widely known as the first solar oven, getting temperatures of 230 degrees Fahrenheit. After that in 1839 a most important landmark in the progression of solar energy occurs with the significant of the photovoltaic effect by a French scientist Edmond Becquerel. In this he used two electrodes placed in an electrolyte and then exposing it to the light and results is tremendous electricity increased a lot. After that lots of experiment are occurred by various scientists at time to time and modified our solar energy system to produce more electricity from solar energy. But now a day’s also in this field various experiments are doing by a scientist, how to utilize maximum solar energy which is available on the earth.

In 1873, Willoughby Smith discovered photoconductivity of a material known as selenium. In 1887 there was the discovery of the ultraviolet ray capacity to cause a spark jump between two electrodes and this was done by Heinrich Hertz. In 1891 the first solar heater was created. In 1893 the first solar cell was introduced. In 1908 William J. Baileys invented a copper collector which was constructed using copper coils and boxes. In 1958, solar energy was used in space. In the 1970′s, Exxon Corporation designed an efficient solar panel which was less costly to manufacture. Less cost manufacturing process of solar panel became the major milestone in the history of solar energy. In 1977 the US government embraced the use of solar energy by launching the Solar Energy Research Institute. In 1981, Paul Macready produced the first solar powered aircraft. in the year 1982 there was the development of the first solar powered cars in Australia. In 1999 the largest plant was developed producing more than 20 kilowatts.

In 1999, the most proficient solar cell was developed with a photo-voltaic efficiency of 36 percent, now a day we produce 200 megawatts to 600 megawatts electricity from solar energy like in India’s Gujarat Solar Park, a compilation of solar farms spotted around the Gujarat region, show a mutual installed capacity of 605 megawatts and Golmud Solar Park in China, with an installed capacity of 200 megawatts.

Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.

Electrical4u

Electrical4U is dedicated to the teaching and sharing of all things related to electrical and electronics engineering.

What is Steady State Stability in Power System?
What is Steady State Stability in Power System?
Definition of Steady State StabilitySteady state stability is defined as the capability of an electric power system to sustain its initial operating condition following a small disturbance, or to converge to a state closely approximating the initial condition when the disturbance persists. This concept holds critical significance in power system planning and design, the development of specialized automatic control devices, the commissioning of new system components, and the adjustment of operati
Edwiin
07/26/2025
What is Voltage Stability in Power Systems?
What is Voltage Stability in Power Systems?
Definition of Voltage StabilityVoltage stability in a power system is defined as the ability to maintain acceptable voltages at all buses under both normal operating conditions and after being subjected to a disturbance. In normal operation, the system’s voltages remain stable; however, when a fault or disturbance occurs, voltage instability may arise, leading to a progressive and uncontrollable voltage decline. Voltage stability is sometimes referred to as "load stability."Voltage instability c
Encyclopedia
07/26/2025
Difference Between Shunt and Series Voltage Regulator
Difference Between Shunt and Series Voltage Regulator
Linear voltage regulators are mainly classified into two types: shunt voltage regulators and series voltage regulators. The key difference between them lies in the connection of the control element: in a shunt voltage regulator, the control element is connected in parallel with the load; in contrast, in a series voltage regulator, the control element is connected in series with the load. These two types of voltage regulator circuits operate on different principles and thus have their own advanta
Edwiin
07/25/2025
What is Dual Trace Oscilloscope?
What is Dual Trace Oscilloscope?
What is Dual Trace Oscilloscope?DefinitionA dual-trace oscilloscope uses a single electron beam to generate two separate traces, each deflected by an independent input source. To produce these two traces, it primarily employs two operating modes—alternate mode and chopped mode—controlled by a switch.Purpose of a Dual-Trace OscilloscopeWhen analyzing or studying multiple electronic circuits, comparing their voltage characteristics is often critical. While one could use multiple oscilloscopes for
Encyclopedia
07/25/2025
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!