Electrical Grid System

Electrical4u
03/22/2024

What Is Electrical Grid System

The connection of several generating stations in a network of particular transmission voltage level is commonly known as electrical grid system. By interconnecting different power generating stations we can solve various difficulties arise in power system. The structure, or “network topology” of a grid can vary depending on the the load and generation characteristics, constraints of budget and the requirements for system reliability. The physical layout is often forced by the geology and land availablility.

Although, forming a grid by interconnecting different generating stations located at different places is significantly expensive since the protections and operations of the entire system become more complicated. But untill modern power system demands the interconnected grid between the power stations because of its tremendous benefits against the power stations which are running individually. There are some advantages of interconnected grid system listed below one by one.

Electrical Grid System

  1. The interconnected grid increases the reliability of power system significantly. In case of failure of any generating station, the network (grid) will share the load of that generating plant. Increased reliability is the most significant advantage of a grid system.

  2. The arrangement can exchange the peak load of a plant. In case of individual operation of a generating station, if the peak load increases beyond the capacity of the generating station, we have to impose partial load shedding on the system. But when we connect the generating station to a grid system the grid carries the extra load of the station. There is no need for partial load shedding or no need for enhancement of the capacity of that particular generating station.

  3. Sometimes there are numbers of inefficient old generating stations available with a generating authority which they cannot run in continuous basis from the commercial point of view. If the entire load of the system exceeds the grid capacity, the generating authority can run these old, and inefficient plants for a short duration to meet the excess demand of the network. In this way, the authority can utilize the old and inefficient plants up to some extent without keeping them entirely idle.

  4. The grid covers a large number of consumers than that of an individual generating station. So the fluctuation of load demand of a grid is much less than that of a single generating plant. That means the load imposed on the generating station from a grid is much consistent. Depending on the consistency of the load, we can choose the installed capacity of the generating station in such a manner that the plant can run with nearly its full capacity for a significant period of time during each day. Hence the generation of electricity would be economical.

  5. The grid system can improve the diversity factor of each generating station connected to the grid. The diversity factor gets improved because the maximum demand of the grid shared by the generating station is much lesser than the maximum demand imposed on the generating station if it runs individually.

Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.

Electrical4u

Electrical4U is dedicated to the teaching and sharing of all things related to electrical and electronics engineering.

What is Steady State Stability in Power System?
What is Steady State Stability in Power System?
Definition of Steady State StabilitySteady state stability is defined as the capability of an electric power system to sustain its initial operating condition following a small disturbance, or to converge to a state closely approximating the initial condition when the disturbance persists. This concept holds critical significance in power system planning and design, the development of specialized automatic control devices, the commissioning of new system components, and the adjustment of operati
Edwiin
07/26/2025
What is Voltage Stability in Power Systems?
What is Voltage Stability in Power Systems?
Definition of Voltage StabilityVoltage stability in a power system is defined as the ability to maintain acceptable voltages at all buses under both normal operating conditions and after being subjected to a disturbance. In normal operation, the system’s voltages remain stable; however, when a fault or disturbance occurs, voltage instability may arise, leading to a progressive and uncontrollable voltage decline. Voltage stability is sometimes referred to as "load stability."Voltage instability c
Encyclopedia
07/26/2025
Difference Between Shunt and Series Voltage Regulator
Difference Between Shunt and Series Voltage Regulator
Linear voltage regulators are mainly classified into two types: shunt voltage regulators and series voltage regulators. The key difference between them lies in the connection of the control element: in a shunt voltage regulator, the control element is connected in parallel with the load; in contrast, in a series voltage regulator, the control element is connected in series with the load. These two types of voltage regulator circuits operate on different principles and thus have their own advanta
Edwiin
07/25/2025
What is Dual Trace Oscilloscope?
What is Dual Trace Oscilloscope?
What is Dual Trace Oscilloscope?DefinitionA dual-trace oscilloscope uses a single electron beam to generate two separate traces, each deflected by an independent input source. To produce these two traces, it primarily employs two operating modes—alternate mode and chopped mode—controlled by a switch.Purpose of a Dual-Trace OscilloscopeWhen analyzing or studying multiple electronic circuits, comparing their voltage characteristics is often critical. While one could use multiple oscilloscopes for
Encyclopedia
07/25/2025
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!