Commercial Integrated Rectifier Stack
Key attributes
| Brand | RW Energy |
| Model NO. | Commercial Integrated Rectifier Stack |
| Rated voltage | 3*230(400)V |
| Rated normal current | 1200A |
| Rated Output Rating | 480KW |
| Series | WZ12Z |
Product descriptions from the supplier
Product Overview
Tailored for large public charging stations, commercial parking clusters, auto test bases, gas station energy hubs, and government/enterprise charging hubs, this rectifier stack offers 480kW/960kW/1200kW specs. It supports 12 single-gun or 6 dual-gun terminals, enabling 12 vehicles to charge simultaneously. Compatible with CCCP 1.6J (standalone/commercial use), it has standard RFID + optional credit card payment. IP54/IK10 protection and -30℃~55℃ operating temperature ensure stable outdoor operation, with integrated design for easy installation and maintenance.
Key Features
Flexible Terminal Configuration: 12 single-gun or 6 dual-gun options, adapting to diverse parking and service modes.
12-Vehicle Concurrent Charging: Boosts charging station throughput for high-traffic scenarios.
Parallel Output: Optional 40kW per port, balancing power distribution to avoid monopolization.
Configurable Power: Adjusts based on grid load and battery states, ensuring economic operation.
Dual-Mode Support: Standalone (internal management) and commercial (platform connection) modes.
Full-Vehicle Compatibility: 200-1000VDC voltage, 1200A max current, suitable for passenger cars, trucks, etc.
Diversified Payment: Standard RFID + optional credit card reader, meeting commercial needs.
High Protection: IP54 dustproof/waterproof + IK10 impact resistance for harsh outdoor environments.
Comprehensive Safety: Overvoltage/lightning/overcurrent/leakage protection + emergency stop button.
Technical Parameters
Category |
specifications |
Data parameters |
|
Appearance structure |
Dimensions (L x D x H) |
1500mm x 800mm x 1850mm |
1900mm x 900mm x 1950mm |
Weight |
550kg |
750kg |
|
Maximum carrying capacity |
6 dual gun charging stations or 12 single gun charging stations |
||
Parallel Charge Mode (Optional) |
40kW per Port |
||
Electrical indicators |
Input Voltage |
400VAC / 480VAC (3P+N+PE) |
|
Input frequency |
50/60Hz |
||
Output Voltage |
200 - 1000VDC |
||
Output current |
0 to 1200A |
0 to 4000A |
|
rated power |
480kW |
960kW/1200kW |
|
Efficiency |
≥94% at nominal output power |
||
Power factor |
> 0.98 |
||
Communication protocol |
CCCP 1.6J |
||
functional design |
Display |
Customize according to requirement |
|
RFID system |
ISO/IEC 14443A/B |
||
Access Control |
RFID: ISO/IEC 14443A/B / Credit Card Reader (Optional) |
||
Communication |
Ethernet - Standard | 3G/4G Modem (Optional) |
||
Power Electronics Cooling |
Air Cooled |
||
work environment |
Operating temperature |
-30℃ to 55℃ |
|
Working/ Storage Humidity |
≤ 95% RH/≤ 99% RH (Non-condensing) |
||
Altitude |
< 2000m |
||
Ingress Protection |
IP54/ IK10 |
||
safety design |
Safety standard |
GB/T 18487, GB/T 20234, GB/T 27930, ISO15118, IEC61851 |
|
Safety protection |
Overvoltage protection, lightning protection, overcurrent protection, leakage protection, waterproof protection, etc. |
||
Emergency Stop |
Emergency Stop Button Disables Output Power |
||
Application Scenarios
Large Public Charging Stations: 960kW/1200kW version for high traffic; 12-vehicle concurrent charging reduces queuing.
Commercial Parking Clusters: 480kW version with flexible terminal configuration; convenient self-service payment.
Auto Test/Delivery Centers: 960kW/1200kW version for multiple vehicles; configurable power adapts to test scenarios.
Gas Station Energy Hubs: 480kW/960kW version, compact design fits outdoor environment; enriches services.
Government/Enterprise Charging Hubs: 480kW/960kW version, standalone/commercial modes for internal/public use.
Public Transport Terminals: 1200kW version for buses/sanitation vehicles; high current shortens charging time.
1. Only as an additional service, not for profit purposes: For scenarios such as hotels/homestays, beauty salons, etc., it is recommended to use a light asset model and deploy a small amount of WZ15L, WZ15W, or WZ17W for charging settlement through local pricing models, in order to provide additional value-added services.
2. Scenarios for small commercial charging stations/shopping mall charging stations: Considering the load capacity of the station area, it is not possible to deploy too many charging positions. WZ05, WZ06, WZ07, WZ08, and other fast charging devices with one machine and two guns can be selected, which are the preferred choices for the renovation of old parking lots. They can be easily deployed and used. If you need a scenario with one machine and multiple positions, you can choose the WZ09 and WZ10 series.
3. Medium to large commercial charging station scenarios: Choose multiple integrated one machine dual gun high-power solutions, such as WZ06, WZ07, WZ08, WZ09, WZ10 series, or a set of WZ12 series, to meet the simultaneous charging of multiple vehicles.
4. Large and ultra large commercial charging scenarios: Choose the WZ12 series, equipped with a large number of fast charging terminals and a small number of liquid cooled charging terminals. Firstly, it can meet the ultra fast charging needs of some high-end car models, demonstrating operational strength and improving reputation. Secondly, it can meet the simultaneous charging needs of many vehicles through a large number of fast charging terminals.
Peak efficiency ≥ 96%; The power factor is all>0.98, with low energy loss.
The entire system supports intelligent power regulation, which can dynamically allocate power based on grid load and battery status, avoiding grid overload and reducing operating costs.
Related Products
Related Knowledges
-
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026 -
What’s the Difference Between Rectifier Transformers and Power Transformers?What is a Rectifier Transformer?"Power conversion" is a general term encompassing rectification, inversion, and frequency conversion, with rectification being the most widely used among them. Rectifier equipment converts input AC power into DC output through rectification and filtering. A rectifier transformer serves as the power supply transformer for such rectifier equipment. In industrial applications, most DC power supplies are obtained by combining a rectifier transformer with rectifier equ01/29/2026
Related Solutions
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical m04/22/2025 -
RW8000 DMS Distribution Management System SolutionsOverviewNowadays, the development trend of power grid is intellectualization. As an important part of power grid, the power distribution system is very close to the customers and it has to run properly. The distribution management system (DMS）played an important role in it.Introduction:RW8000 power distribution management system (DMS) is designed for the smart grids. It is based on real-time application, centered on distribution network operation and management, focusing on the business process09/07/2023 -
High-Precision Electrical Parameter Monitoring System Solution1.IntroductionWith the increasingly stringent requirements for power supply quality in high-end facilities such as precision manufacturing, medical diagnosis, and data centers, traditional power monitoring systems, due to their low sampling accuracy and weak data analysis capabilities, can no longer meet the demand for deep insight and precise management of power quality. In response, we are introducing a new generation High-Precision Electrical Parameter Monitoring System. With millisecond-l09/28/2025
