| Brand | Wone |
| Model NO. | DC Load Bank - 200KW750VDC |
| Rated voltage | DC750V |
| Power | 150KW |
| Series | LB |
Feature
It can reach the electrical parameters with high power (1kW to 10MW),high voltage ( AC 110V to 690V) or high current (10000A or more).
According to the needs to design the load steps,configure intelligent digital display meter,all protections can be configured optionally (Overheating alarm, Short circuit protection, Overheating protection, Fan overloading protection, Emergency stop button etc.).
In addition, our water-cooled load banks can also be equipped with cooling system and water tower.Customized solutions could be available upon request.
Load Bank Structure
When a single resistor can't meet load demand, multiple resistors are combined in series and parallel to increase power to meet the requirements.
The internal load resistors are circularly cooled by the axial fans.
The types of load built-in resistors are: high power wire wound resistors, aluminum housed resistors, high energy resistors, plate resistors, stainless steel resistors, high voltage resistors.
Notes
There shall be no flammable and explosive corrosive medium in the installation scope.
Connect the load and instrument power supply according to the identification on the equipment panel. After confirming that the voltage is normal, turn on the instrument power switch on the enclosure. At this time, all instruments display "0", all fans operate normally, and connect the load power supply .
To ensure safety, please do not touch the cabinet surface (except the panel) to prevent scalding.
After the load bank stops working, please delay 30 minutes to turn off the power supply of the fans, so as to avoid the accumulation of high temperature causing damage to other parts (such as instruments, switches, etc.)
There will be light smoke when the load is used for the first time,which is a normal phenomenon that silicone resin volatilizes when it meets high temperature medium.
Application Area
Generator test, power supply equipment, battery test, frequency converter, elevator, sub arc welding machine, lifting machinery, construction machinery, ship, rolling mill, wire drawing machine, centrifuge, UPS power supply, pulse load application, winch, generator, transformer, starting, braking, speed regulation and load test, as well as medical, railway, automobile, military and industrial control environment, etc.
-
AC intelligent resistive load bank 1500kW for diesel generators and power system testing
-
AC 400VAC 2000kW intelligent resistive load bank for diesel generators and power system testing
-
AC DC 220V 400V 11KV resistive reactive load bank 1000kW load bank for testing generator
-
10.5KV Neutral grounding high-resistance cabinet for generator
-
DC Load Bank- 61KW145VDC
-
Why Regular Transformer Maintenance Matters: 5 Serious Consequences of Neglecting ItI. Allowable TemperatureWhen a transformer is in operation, its windings and iron core generate copper loss and iron loss. These losses are converted into heat energy, causing the temperature of the transformer's iron core and windings to rise. If the temperature exceeds the allowable value for a long time, the insulation will gradually lose its mechanical elasticity and age.The temperature of each part of the transformer during operation is different: the winding temperature is the highest, folRockwell09/12/2025 -
How to Implement Condition-Based Maintenance for Power Transformers? A Complete 4-Step Process Analysis1. Definition of Condition-Based MaintenanceCondition-based maintenance refers to a maintenance method where decisions on whether and how to perform maintenance are determined based on the real-time operating status and health condition of equipment. It has no fixed maintenance methods or schedules. The prerequisite for condition-based maintenance is the establishment of equipment parameters and the comprehensive analysis of various operational information of the equipment, so as to make reasonaNoah09/12/2025 -
Can't choose a dry-type transformer? Get expert advice – free.Traction Rectifier TransformersRated capacity: 800 to 4400 kVA; Voltage class: 10 kV and 35 kV; Rectifier pulse number: 12-pulse and 24-pulse. Compared with 12-pulse rectifier circuits, 24-pulse rectifier circuits can reduce the harmonic pollution of the power grid by 50%, and no filtering equipment is needed at this location. It is suitable for power supply systems of urban subways and rail transit.Excitation Rectifier TransformersRated capacity: 315 to 3000 × 3 kVA; Voltage class: 10 kV, 13.8Vziman09/12/2025 -
SG10 Series Transformer Overload Protection Solution | Prevent Overheating and Damage, View NowOperating Conditions in National Standard GB 6450-1986Ambient temperature: Maximum ambient temperature: +40°C Daily average maximum temperature: +30°C Annual average maximum temperature: +20°C Minimum temperature: -30°C (outdoor); -5°C (indoor) Horizontal axis: Product load; Vertical axis: Average coil temperature rise in Kelvin (note: not in Celsius).For Class H insulation products, the long-term temperature resistance of insulation materials is stipulated by the state as 180°C. However, the inRockwell09/12/2025 -
High harmonics? Your transformer may be overheating and aging fast.This report is based on the analysis of one-day power quality monitoring data of your company's distribution system. The data shows that there is significant three-phase current harmonic distortion in the system (with a high total harmonic distortion of current, THDi). In accordance with international standards (IEC/IEEE), harmonic currents at this level have posed substantial risks to the safe, reliable, and economical operation of the power supply transformer, mainly manifested in additional hLeon09/12/2025 -
Ultimate Guide to AC Contactor Abnormal Noise: From Electromagnetic Noise to Mechanical Vibration, Accurate Diagnosis and HandlingIn electrical control systems, AC contactors are among the commonly used electrical components, and they are also a common source of various electrical faults. After long-term use—especially in harsh environments with high levels of dust—AC contactors may sometimes emit squeaking or rattling noises after being pulled in and held. The causes of this phenomenon are analyzed as follows.Squeaking Noise After Pull-In and HoldingA fully functional AC contactor makes no noise when energized and pulledFelix Spark09/11/2025
