• 110kV and 50kV AC SF6 Gas Insulated Voltage Transformer
  • 110kV and 50kV AC SF6 Gas Insulated Voltage Transformer
  • 110kV and 50kV AC SF6 Gas Insulated Voltage Transformer
110kV and 50kV AC SF6 Gas Insulated Voltage Transformer
$1000.00
Model
JDQXF-110-0.5P
Basic info
Brand Wone
Model NO. JDQXF-110 SF6 Gas Insulated Voltage Transformer
Primary voltage 110√3KV
Nominal voltage 110KV
insulation level 126/200/480KV
Series JDQXF-110
Product Detail

Description:

An instrument used to convert voltage. However, the purpose of the transformer to convert the voltage is to facilitate the transmission of electric energy, so the capacity is very large, and it is generally calculated in kilovolt-ampere or megavolt-ampere; The purpose of the voltage transformer is to convert the voltage, which is mainly used to supply power to the measuring instrument and relay protection device, and is used to measure the voltage, power and electric energy of the line.

Industry applications:

It is suitable for outdoor and neutral point effective grounding in 110kV and 50kV AC power systems, for electric energy, voltage measurement and relay protection.

Features:

  •  This product is a single-phase, independent SF6 gas-insulated voltage transformer, which adopts a vertical structure, which is composed of several parts, such as a body, a metal shell, a lead pipe and a porcelain sleeve.

  • The transformer windings are single-stage structured, and the composite insulation composed of SF6 gas and rhombic dispensing polyester film can withstand high voltages. The low-voltage winding and high-voltage winding are equipped with internal and external electrostatic screens, and the high-voltage winding is also equipped with a shielding cover to further improve the field strength distribution. The high and low voltage windings are installed on the mouth core in a rectangular shape, and the whole body is fixed in the shell, and the shell is connected to the casing.

  •  The product is equipped with a primary connection plate, a grounding seat, a secondary junction box, an inflatable joint, a pressure gauge (density controller), an adsorbent and an anti-riot sheet.

  •  All sealing parts are sealed with O-shaped sealant gasket and coated with waterproof glue on the outside; The whole product is in a fully sealed state, and the product is filled with gas with rated pressure to ensure the normal operation of the product.

Technical parameters:

image.png


Dimension:

image.png


Product show:

091029818218004659.jpg


Why choose us:

  • We have a professional service team.

  • We have good after-sales.

  • We can guarantee the quality of our products.



Know your supplier
Wone
Main Categories
High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment
Business Type
Design/Manufacture/Sales
Highest Annual Export (USD)
$50,000,000
Professional Experience
1 years
Workplace
65666m²m²
占位
占位
Related Products
Related Knowledges
Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil
Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil
For users, when purchasing a 35kV new energy transformer, choosing between dry-type, mineral oil-filled, or vegetable oil-filled types involves multiple considerations. These include user habits, maintenance-free performance, safety and fire resistance, volume and weight, among others. However, cost differences are undoubtedly one of the most crucial factors.To illustrate the issue intuitively, this paper selects a three-level energy efficiency dual-winding new energy transformer with a rated ca
Ron
07/26/2025
What is the connection group of a transformer?
What is the connection group of a transformer?
Transformer Connection GroupThe connection group of a transformer refers to the phase difference between the primary and secondary voltages or currents. It is determined by the winding directions of the primary and secondary coils, the labeling of their start and end terminals, and the connection mode. Expressed in a clock-like format, there are 12 groups in total, numbered from 0 to 11.The DC method is commonly used to measure the transformer's connection group, mainly to verify whether the con
Vziman
07/26/2025
Working Voltage in Power System
Working Voltage in Power System
Working VoltageThe term "working voltage" refers to the maximum voltage that a device can withstand without sustaining damage or burning out, while ensuring the reliability, safety, and proper operation of both the device and associated circuits.For long-distance power transmission, the use of high voltage is advantageous. In AC systems, maintaining a load power factor as close to unity as possible is also economically necessary. Practically, heavy currents are more challenging to handle than hi
Encyclopedia
07/26/2025
What is Steady State Stability in Power System?
What is Steady State Stability in Power System?
Definition of Steady State StabilitySteady state stability is defined as the capability of an electric power system to sustain its initial operating condition following a small disturbance, or to converge to a state closely approximating the initial condition when the disturbance persists. This concept holds critical significance in power system planning and design, the development of specialized automatic control devices, the commissioning of new system components, and the adjustment of operati
Edwiin
07/26/2025
What is the sequence for powering down the transformer?
What is the sequence for powering down the transformer?
The sequence for shutting down a main transformer is as follows: when de-energizing, the load side should be shut down first, followed by the power supply side. For energizing operations, the reverse order applies: the power supply side is energized first, then the load side. This is because: Energizing from the power supply side to the load side makes it easier to identify the fault range and take prompt judgment and handling measures in case of a fault, preventing the fault from spreading or e
Rockwell
07/26/2025
What are the methods for switching operations of station transformers?
What are the methods for switching operations of station transformers?
Let's take an auxiliary power system with two station transformers as an example. When one station transformer needs to be out of service, there are two operation methods: non-interruptive power supply and instantaneous power interruption. Generally, the method of instantaneous power interruption on the low-voltage side is preferred.The operation method for instantaneous power interruption on the low-voltage side is as follows:Open the 380V power incoming circuit breaker of the corresponding sec
Vziman
07/26/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!