3.6kV 7.2kV 12kV 24kV indoor metal-clad withdrawable switchgear - IEE-Business

English
RFQ

Download the app

3.6kV 7.2kV 12kV 24kV indoor metal-clad withdrawable switchgear

discuss personally

Model

Basic info Product Detail Supplier

Basic info

Brand	ROCKWILL
Model NO.	KYN28 indoor metal-clad withdrawable switchgear
Rated voltage	24kV
Rated frequency	50/60Hz
Series	KYN28

Product Detail

Description ：

The KYN28 indoor metal-clad withdrawable switchgear(hereinafter short as switchgear) is a complete power distribution device for 3.6-24kV,3-phase AC 50Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc,so as to control, protect and monitor the system. The switchgear meets IEC298,GB3906-91.In addition to be used with domestic VS1 vacuum circuit breaker, it can also be used with VD4 from ABB,3AH3 from Siemens domestic ZN65A,and VB2 from GE, etc,it truly is a power distribution device with good performance.

Main function introduction:

Centralized (Draw-out) Layout
Armored Compartmentalization
Standardized Modular Design
Excellent performance
Flexible Maintenance

Technology parameters:

Device structure:

Photos of frontal view：

Know your supplier

ROCKWILL

Rockwill Electric Group Global Manufacturer of High voltage and medium-voltage power equipment and smart grid solutions. Headquartered in Wenzhou, China. Serving 100+ countries with quality, innovation, and trust. What We Offer: • HV-MV switchgear (VCB, SF₆ circuit breakers, RMU, GIS) • Distribution transformers and substations • Smart grid and monitoring systems • Solar, wind, EV charging, and energy storage solutions • EPC turnkey power projects Certified: ISO 9001 / ISO 14001 / ISO 45001

Main Categories

High Voltage Electrical Apparatus

Business Type

Design/Manufacture/Sales

Highest Annual Export (USD)

$150,000,000

Professional Experience

16 years

Workplace

108000m²m²

占位

占位

Documents

Restricted.

KYN28 indoor metal-clad withdrawable switchgear

Manual English

Consulting

FAQ

Q： What is the IP rating of UniGear ZS1?: A：
UniGear ZS1 has an IP4X rating per IEC 62271-200, protecting against solids ≥1mm (e.g., dust) in indoor environments. Liquid ingress protection isn’t rated; avoid direct water exposure.

Q： What is the heat dissipation of UniGear ZS1?: A：
UniGear ZS1's heat dissipation complies with IEC 62271, achieving ≤65K temperature rise at rated current via optimized airflow and conductive materials (e.g., galvanized steel). Ensures stable operation under full load.

Related Products

Related Knowledges

Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil

Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil

For users, when purchasing a 35kV new energy transformer, choosing between dry-type, mineral oil-filled, or vegetable oil-filled types involves multiple considerations. These include user habits, maintenance-free performance, safety and fire resistance, volume and weight, among others. However, cost differences are undoubtedly one of the most crucial factors.To illustrate the issue intuitively, this paper selects a three-level energy efficiency dual-winding new energy transformer with a rated ca

What is the connection group of a transformer?

What is the connection group of a transformer?

Transformer Connection GroupThe connection group of a transformer refers to the phase difference between the primary and secondary voltages or currents. It is determined by the winding directions of the primary and secondary coils, the labeling of their start and end terminals, and the connection mode. Expressed in a clock-like format, there are 12 groups in total, numbered from 0 to 11.The DC method is commonly used to measure the transformer's connection group, mainly to verify whether the con

Working Voltage in Power System

Working Voltage in Power System

Working VoltageThe term "working voltage" refers to the maximum voltage that a device can withstand without sustaining damage or burning out, while ensuring the reliability, safety, and proper operation of both the device and associated circuits.For long-distance power transmission, the use of high voltage is advantageous. In AC systems, maintaining a load power factor as close to unity as possible is also economically necessary. Practically, heavy currents are more challenging to handle than hi

What is Steady State Stability in Power System?

What is Steady State Stability in Power System?

Definition of Steady State StabilitySteady state stability is defined as the capability of an electric power system to sustain its initial operating condition following a small disturbance, or to converge to a state closely approximating the initial condition when the disturbance persists. This concept holds critical significance in power system planning and design, the development of specialized automatic control devices, the commissioning of new system components, and the adjustment of operati

What is the sequence for powering down the transformer?

What is the sequence for powering down the transformer?

The sequence for shutting down a main transformer is as follows: when de-energizing, the load side should be shut down first, followed by the power supply side. For energizing operations, the reverse order applies: the power supply side is energized first, then the load side. This is because: Energizing from the power supply side to the load side makes it easier to identify the fault range and take prompt judgment and handling measures in case of a fault, preventing the fault from spreading or e

What are the methods for switching operations of station transformers?

What are the methods for switching operations of station transformers?

Let's take an auxiliary power system with two station transformers as an example. When one station transformer needs to be out of service, there are two operation methods: non-interruptive power supply and instantaneous power interruption. Generally, the method of instantaneous power interruption on the low-voltage side is preferred.The operation method for instantaneous power interruption on the low-voltage side is as follows:Open the 380V power incoming circuit breaker of the corresponding sec