Planar Four-Axis Robot
Key attributes
| Brand | Wone Store |
| Model NO. | Planar Four-Axis Robot |
| Rated Load Capacity | 10kg |
| degree of freedom | 4-direction |
| Maximum working stroke | 800mm |
| Series | SR |
Product descriptions from the supplier
SR series robots are specially developed for desktop pick-up and installation applications with a load capacity of 1-20kg, which can be widely used in electronic products industry, pharmaceutical industry and food industry.
Key features
High speed, high precision
Lightweight structure design with high power density motor application, repeated positioning accuracy of ±0.01mm.
High ease of use, high security
Equipped with independent intellectual property control system, easy to operate, fast programming, support collision detection and other safety functions to ensure the safety of personnel and products.
High cost performance, well tested by the market
Cost-effective, long-tested market after many years of market inspection and a large number of applications, stable performance, high reliability, widely used in 3C electronics, packaging and printing, electronic information kitchen and other industries.
High load, high inertia
Using self-developed control technology, it supports 10/20kg load under high torque conditions, and the 4-axis inertia of the planetary reducer is larger and the speed performance is better.
High rigidity, high reliability
The whole system adopts RV reducer to ensure the rigidity of the joint, while adjusting the inertia ratio to improve the dynamic response and service life of the robot.
High speed, high performance
It can withstand higher start-stop inertia, can meet higher speed operation under full load, and meet the requirements of different applications.
Technology Parameters
Industrial robots |
SR3-400 |
SR5-700 |
SR6-500 |
SR6-600 |
|
Degrees of freedom |
4 |
4 |
4 |
4 |
|
Maximum load |
1kg/3kg |
2kg/5kg |
2kg/6kg |
2kg/6kg |
|
Maximum working radius |
400mm |
700mm |
500mm |
600mm |
|
Repeat positioning accuracy |
±0.01 mm |
±0.02 mm |
±0.02 mm |
±0.02 mm |
|
Range of motion |
J1 |
±132° |
±132° |
±132° |
±132° |
J2 |
±135° |
±150° |
±150° |
±150° |
|
J3 |
0/-150mm |
0/-200mm |
0/-200mm |
0/-200mm |
|
J4 |
±360° |
±360° |
±360° |
±360° |
|
Maximum speed |
J1 |
530°/s, 9.24 rad/s |
335°/s, 5.84 rad/s |
375°/s, 6.54 rad/s |
375°/s, 6.54 rad/s |
J2 |
700°/s, 12.21 rad/s |
600°/s, 10.46 rad/s |
600°/s, 10.46 rad/s |
600°/s, 10.46 rad/s |
|
J3 |
1165mm/s |
1111mm/s |
1111mm/s |
1111mm/s |
|
J4 |
2600°/s, 43.35 rad/s |
2000°/s, 34.88 rad/s |
2000°/s, 34.88 rad/s |
2000°/s, 34.88 rad/s |
|
Allowing for the moment of inertia |
J4 |
0.005 kgm3 |
0.013 kgm3 |
0.013 kgm3 |
0.013 kgm3 |
Allowable Torque |
J4 |
3.29Nm |
4.23Nm |
4.23Nm |
4.23Nm |
Applicable Environment |
Temperature |
0°C to 45°C |
0°C to 45°C |
0°C to 45°C |
0°C to 45°C |
Humidity |
20% to 80% |
20% to 80% |
20% to 80% |
20% to 80% |
|
Other |
Avoid contact with flammable, explosive, or corrosive gases and liquids, and keep away from sources of electronic noise (such as plasma). |
||||
Teaching device cable length |
8m |
8m |
8m |
8m |
|
Body-to-cabinet connection cable length |
3m |
3m |
3m |
3m |
|
I/O parameters |
Digital inputs: 32-bit (NPN and PNP compatible), 32-bit digital outputs (NPN only) |
Digital inputs: 32-bit (NPN and PNP compatible), 32-bit outputs (NPN only) |
Digital inputs: 32-bit (NPN and PNP compatible), 32-bit digital outputs (NPN only) |
Digital inputs: 32-bit (NPN and PNP compatible), 32-bit outputs (NPN only) |
|
Body-prepared signal cable |
15-pin (aircraft connector) |
15-pin (aircraft connector) |
15 positions (airplane plug connection) |
15-pin (aircraft connector) |
|
Reserved air circuit |
3xφ6 |
3xφ6 |
3xφ6 |
3xφ6 |
|
Power capacity |
0.61kVA |
0.73kVA |
0.73kVA |
0.73kVA |
|
Rated power/voltage/current |
0.49 kW / Single-phase AC 220V / 2.7 A |
0.58 kW / Single-phase AC 220 V / 3.1 A |
0.58 kW / Single-phase AC 220 V / 3.1 A |
0.58 kW / Single-phase AC 220 V / 3.1 A |
|
Enclosure/Electrical Cabinet Protection Rating |
IP54/IP20 |
IP54/IP20 |
IP54/IP20 |
IP54/IP20 |
|
Installation method |
Floor and tabletop installation |
Floor and tabletop installation |
Floor and tabletop installation |
Floor and tabletop installation |
|
Body/Electrical Cabinet Weight |
17.5kg/10.65kg |
22.5kg/10.65kg |
19kg/10.65kg |
21.5kg/10.65kg |
|
Industrial robots |
SR10-600 |
SR10-800 |
SR20-800 |
SR20-1000 |
|
Degrees of freedom |
4 |
4 |
4 |
4 |
|
Maximum load |
5kg/10kg |
5kg/10kg |
10kg/20kg |
10kg/20kg |
|
Maximum working radius |
600mm |
800mm |
800mm |
1000mm |
|
Repeat positioning accuracy |
±0.025 mm |
±0.025 mm |
±0.025 mm |
±0.025 mm |
|
Range of motion |
J1 |
±135° |
±135° |
±132° |
±132° |
J2 |
±155° |
±155° |
±155° |
±155° |
|
J3 |
0/-300mm |
0/-300mm |
0/-400mm |
0/-400mm |
|
J4 |
±360° |
±360° |
±360° |
±360° |
|
Maximum speed |
J1 |
430°/s, 7.50 rad/s |
430°/s, 7.50 rad/s |
530°/s, 9.25 rad/s |
420°/s, 7.33 rad/s |
J2 |
650/s, 11.34 rad/s |
650°/s, 11.34 rad/s |
580°/s, 10.12 rad/s |
580°/s, 10.12 rad/s |
|
J3 |
2200mm/s |
2200mm/s |
2150mm/s |
2150mm/s |
|
J4 |
2250°/s, 39.26 rad/s |
2250°/s, 39.26 rad/s |
1700°/s, 29.67 rad/s |
1700°/s, 29.67 rad/s |
|
Allowing for the moment of inertia |
J4 |
0.02 kgm3 |
0.02 kgm3 |
0.082 kgm3 |
0.082 kgm3 |
Allowable Torque |
J4 |
8.83Nm |
8.83Nm |
21.86Nm |
21.86Nm |
Applicable Environment |
Temperature |
0°C to 45°C |
0°C to 45°C |
0°C to 45°C |
0°C to 45°C |
Humidity |
20% to 80% |
20% to 80% |
20% to 80% |
20% to 80% |
|
Other |
Avoid contact with flammable, explosive, or corrosive gases and liquids, and keep away from sources of electronic noise (such as plasma). |
||||
Teaching device cable length |
8m |
8m |
8m |
8m |
|
Body-to-cabinet connection cable length |
3m |
3m |
3m |
3m |
|
I/O parameters |
Digital inputs: 32-bit (NPN and PNP compatible), 32-bit digital outputs (NPN only) |
Digital inputs: 32-bit (NPN and PNP compatible), 32-bit digital outputs (NPN only) |
Digital inputs: 32-bit (NPN and PNP compatible), 32-bit digital outputs (NPN only) |
Digital inputs: 32-bit (NPN and PNP compatible), 32-bit outputs (NPN only) |
|
Body-prepared signal cable |
15-pin (aircraft connector) |
15-pin (aircraft connector) |
15-pin (airplane plug connection) |
15-pin (aircraft connector) |
|
Reserved air circuit |
3xφ6 |
3xφ6 |
2xφ6 + 1xφ8 |
2xφ6 + 1xφ8 |
|
Power capacity |
1.31kVA |
1.31kVA |
1.71kVA |
1.71kVA |
|
Rated power/voltage/current |
1.05 kW / Single-phase AC 220 V / 5.7 A |
1.05 kW / Single-phase AC 220 V / 5.7 A |
1.37 kW / Single-phase AC 220 V / 7.3 A |
1.37 kW / Single-phase AC 220 V / 7.3 A |
|
Enclosure/Electrical Cabinet Protection Rating |
IP54/IP20 |
IP54/IP20 |
IP54/IP20 |
IP54/IP20 |
|
Installation method |
Floor and tabletop installation |
Floor and tabletop installation |
Floor and tabletop installation |
Floor and tabletop installation |
|
Body/Electrical Cabinet Weight |
32kg/10.65kg |
35kg/10.65kg |
50kg/10.65kg |
53kg/10.65kg |
|
Related Products
Related Knowledges
-
What are the causes of dielectric withstand failure in vacuum circuit breakers?Causes of Dielectric Withstand Failure in Vacuum Circuit Breakers: Surface contamination: The product must be thoroughly cleaned before dielectric withstand testing to remove any dirt or contaminants.Dielectric withstand tests for circuit breakers include both power-frequency withstand voltage and lightning impulse withstand voltage. These tests must be performed separately for phase-to-phase and pole-to-pole (across the vacuum interrupter) configurations.Circuit breakers are recommended to be tFelix Spark11/04/2025 -
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025 -
How to Overhaul a Transformer Conservator (Oil Pillow)?Overhaul Items for Transformer Conservator:1. Ordinary-Type Conservator Remove the end covers on both sides of the conservator, clean rust and oil deposits from inner and outer surfaces, then apply insulating varnish to the inner wall and paint to the outer wall; Clean components such as the dirt collector, oil level gauge, and oil plug; Check that the connecting pipe between the explosion-proof device and the conservator is unobstructed; Replace all sealing gaskets to ensure good sealing with nFelix Spark11/04/2025 -
What are the causes of failures in low-voltage switchgear circuit breakers themselves?Based on years of field statistics on switchgear accidents, combined with analysis focusing on the circuit breaker itself, the main causes have been identified as: failure of operation mechanism; insulation faults; poor breaking and closing performance; and poor conductivity.1.Failure of Operation MechanismFailure of operation mechanism manifests as delayed operation or unintended operation. Since the most basic and important function of a high-voltage circuit breaker is to operate correctly andFelix Spark11/04/2025 -
What Are the Factors Influencing the Impact of Lightning on 10kV Distribution Lines?1. Induced Lightning OvervoltageInduced lightning overvoltage refers to the transient overvoltage generated on overhead distribution lines due to nearby lightning discharges, even when the line is not directly struck. When a lightning flash occurs in the vicinity, it induces a large amount of charge on the conductors—opposite in polarity to the charge in the thundercloud.Statistical data shows that lightning-related faults caused by induced overvoltages account for approximately 90% of total fauEcho11/03/2025 -
THD Measurement Error Standards for Power SystemsError Tolerance of Total Harmonic Distortion (THD): A Comprehensive Analysis Based on Application Scenarios, Equipment Accuracy, and Industry StandardsThe acceptable error range for Total Harmonic Distortion (THD) must be evaluated based on specific application contexts, measurement equipment accuracy, and applicable industry standards. Below is a detailed analysis of key performance indicators in power systems, industrial equipment, and general measurement applications.1. Harmonic Error StandarEdwiin11/03/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
