STS Prepaid Wi-Fine Energy Meter Single Phase Wall Mounted ODM
Key attributes
| Brand | Wone |
| Model NO. | STS Prepaid Wi-Fine Energy Meter Single Phase Wall Mounted ODM |
| Rated voltage | 230V |
| Rated normal current | 5(50)A |
| Rated frequency | 50（Hz） |
| Methods of Communication | RS485 |
| Series | D123073 |
Product descriptions from the supplier
Description
STS prepaid standard meter is a media-free prepaid meter, which does not need to be recharged with IC card, magnetic card, radio frequency card, etc., and only needs to be recharged by entering the 20-digit code through the keyboard; It can also be used for power recharge, data viewing, and control management through remote communication.
Specifications
| Main |
|
|---|---|
| Range | D123073 |
| Product or Componet Type | Energy meter |
| Country of origin | China |
| Complementary |
|
|---|---|
| Phase | Single Phase |
| Type of measurement | ---- |
| Metering type | Measurement |
| Device Application | Energy Charge |
| Accuracy class | Active power 1.0 |
| Rated Current | 5(80) A |
| Rated Voltage | 230V |
| Network Frequency | 50-60Hz |
| Technology Type | Electronic |
| Display Type | LCD display(LCD 6+2 = 999999.99kWh) |
| Impulse Constant | 1000imp/kWh(LED) 1000imp/kvarh |
| Maximum value measured | 99999.99kWh |
| Tariff input | Tariff |
| Communication port protocol | DLMS |
| Communication port support | RS485 |
| Local signalling | ------ |
| Number of inputs | ------- |
| Number of Outputs | -------------- |
| Output voltage | ---- |
| Mounting Mode | --- |
| Mounting Support | ----- |
| Connections - terminals | ------- |
| Standards | IEC62052-11:2003 IEC62053-21:2003 |
| Environment |
|
|---|---|
| IP degree of protection | IP51 |
| Relative humidity | ≤85% |
| Ambient air temperature for operation | -20…70 °C |
| Ambient Air Temperature for Storage | --20…80 °C |
| Operating altitude | --- |
| Dimensions | 55.5mm*121.8mm*207mm |
| Packing Units |
|
|---|---|
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 209mm |
| Package 1 Width | 123mm |
| Package 1 Length | 57mm |
| Package 1 Weight | 1.000kg |
Dimensions
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 65666m²m²
Total staff: 300+
Highest Annual Export(usD): 50000000
Services
Business Type: Design/Manufacture/Sales
Main Categories: Wire cable/High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Instrument meters/New energy/Tester/Integrated Electrical Equipment/Production equipment/Generator/Electrical fittings
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
Three-phase Keypad Prepayment Energy Meter GST7666
-
Single-phase Keypad Smart Energy Meter GSD7666-G
-
Multi-jet Keypad Smart Water Meter
-
Single-phase Smart Energy Meter
-
Three-phase Keypad Smart Energy Meter
-
Single Phase Smart Prepayment Meter
-
Three-Phase Four-Wire Smart Electricity Meter with RS485 Communication
Related Knowledges
-
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025 -
How to Overhaul a Transformer Conservator (Oil Pillow)?Overhaul Items for Transformer Conservator:1. Ordinary-Type Conservator Remove the end covers on both sides of the conservator, clean rust and oil deposits from inner and outer surfaces, then apply insulating varnish to the inner wall and paint to the outer wall; Clean components such as the dirt collector, oil level gauge, and oil plug; Check that the connecting pipe between the explosion-proof device and the conservator is unobstructed; Replace all sealing gaskets to ensure good sealing with nFelix Spark11/04/2025 -
What are the causes of failures in low-voltage switchgear circuit breakers themselves?Based on years of field statistics on switchgear accidents, combined with analysis focusing on the circuit breaker itself, the main causes have been identified as: failure of operation mechanism; insulation faults; poor breaking and closing performance; and poor conductivity.1.Failure of Operation MechanismFailure of operation mechanism manifests as delayed operation or unintended operation. Since the most basic and important function of a high-voltage circuit breaker is to operate correctly andFelix Spark11/04/2025 -
What Are the Factors Influencing the Impact of Lightning on 10kV Distribution Lines?1. Induced Lightning OvervoltageInduced lightning overvoltage refers to the transient overvoltage generated on overhead distribution lines due to nearby lightning discharges, even when the line is not directly struck. When a lightning flash occurs in the vicinity, it induces a large amount of charge on the conductors—opposite in polarity to the charge in the thundercloud.Statistical data shows that lightning-related faults caused by induced overvoltages account for approximately 90% of total fauEcho11/03/2025 -
THD Measurement Error Standards for Power SystemsError Tolerance of Total Harmonic Distortion (THD): A Comprehensive Analysis Based on Application Scenarios, Equipment Accuracy, and Industry StandardsThe acceptable error range for Total Harmonic Distortion (THD) must be evaluated based on specific application contexts, measurement equipment accuracy, and applicable industry standards. Below is a detailed analysis of key performance indicators in power systems, industrial equipment, and general measurement applications.1. Harmonic Error StandarEdwiin11/03/2025 -
Why is it difficult to increase the voltage level?The solid-state transformer (SST), also known as a power electronic transformer (PET), uses voltage level as a key indicator of its technological maturity and application scenarios. Currently, SSTs have reached voltage levels of 10 kV and 35 kV on the medium-voltage distribution side, while on the high-voltage transmission side, they remain in the stage of laboratory research and prototype validation. The table below clearly illustrates the current status of voltage levels across different appliEcho11/03/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
