Ultra thin columnar DC Charger
Key attributes
| Brand | RW Energy |
| Model NO. | Ultra thin columnar DC Charger |
| Rated voltage | 3*230(400)V |
| Rated normal current | 125A |
| Rated Output Rating | 40KW |
| Connector Options | CHAdeMO |
| Series | WZ15L |
Product descriptions from the supplier
Product Overview
This high-efficiency, space-saving DC charger is tailored for medium-to-large scenarios like enterprise fleets, commercial complexes, highway service areas, and government/campus parking lots. It integrates 30kW/40kW changing modules to deliver 40kW/60kW rated output, balancing powerful performance with a compact wall-mounted design (no need for large floor space). Supporting mainstream standards (GBT, CCS1/CCS2, CHAdeMO, Tesla, NACS), it's compatible with most domestic and foreign new energy vehicles without adapters. With ultra-low failure rate, air-cooled heat dissipation, wide operating temperature range (-30°C to 75°C), simple operation, and low noise, it ensures stable, convenient charging in various environments.
Key Features
Dual High-Power & Efficient Charging: 30kW/40kW modules (40kW/60kW output), nominal efficiency ≥94%, shortening charging time.
Compact Design: Dimensions 1300mm x 850mm x 120mm, minimal floor space occupation.
Easy Installation & Operation: No complex civil engineering; 2-second long press to start, brief press to shut down (auto-off after 2s).
Full-Standard Compatibility: Complies with GBT 18487, ISO 15118, CHAdeMO 1.2/2.0, NACS, etc., strong versatility.
Stable Operation: Optimized hardware, air-cooled heat dissipation, -30°C~75°C operating temperature, adapting to harsh conditions.
Low Noise: Operating noise ＜65db, suitable for commercial/office/public areas.
Customizable Cable Length: 3.5m/5m/7m optional, improving charging convenience.
Comprehensive Safety Protection: Over-voltage/under-voltage/over-current/short-circuit protection; input-output insulation ＞2.5kV.
Energy-Saving: Power factor ＞0.98, reducing reactive power loss.
Technical Parameters
Product Model |
WY-40kW |
WY-60KW |
Input Voltage |
380VAC (3P+N+PE) / 50Hz |
|
Output Voltage |
200 - 750VDC |
|
Output Current (default） |
125A |
200A |
Standard for Gun Muzzle |
GBT / CCS1 / CCS2 / CHAdeMO / Tesla |
|
Charging Module |
30KW |
40KW |
Efficiency |
≥94% at nominal output power |
|
Power Factor |
＞0.98 |
|
Operating Temperature |
-30°C to 75°C |
|
Altitude |
< 3000m |
|
Working || Storage Humidity |
≤95% RH / ≤ 99% RH (Non-condensing) |
|
AC Input Cable and Switch |
3*16mm2+2*10mm2，1m 80A / 3*25mm2+2*16mm2, 1m 125A |
|
Weight |
50kg / 60kg |
|
Dimensions (L x D x H) |
1300mm x 850mm x 120mm |
|
Installation |
wall-mounted |
|
Startup Mode |
Press and hold the power button for 2 seconds to power on. |
|
Shutdown Mode |
Press the power button briefly to shut down after 2 seconds. |
|
Power Electronics Cooling |
Air Cooled |
|
Standard |
GBT 18487 & GBT 27930 / ISO 15118 / IEC 61851 / SAE J1772/ CHAdeMO1.2 & CHAdeMO 2.0 / NACS |
|
Charging Cable Length |
3.5m / 5m / 7m（Optional） |
|
Noises |
＜65db |
|
Ingress Protection |
IP30 |
|
Insulation (input - output) |
＞2.5kV |
|
Electrical Safety |
Over-voltage protection, under-voltage protection, over-current protection, short-circuit protection |
|
Application Scenarios
Medium-Sized Enterprise Fleets: Suitable for logistics companies/online car-hailing operators with 10-30 vehicles; centralized charging during lunch breaks/off-peak hours.
Commercial Complexes: Parking garage value-added service; saves space, fast charging during shopping/dining.
Highway Service Areas: Supplements large charging stations; compact for dense installation, reducing queuing time.
Government/Campus Parking Lots: Wall-mounted installation fits limited space; low failure rate eases property management.
New Energy Vehicle 4S Stores: Charges maintenance/test drive/customer vehicles; multi-standard compatibility enhances professionalism.
Logistics Transit Stations: Rapid charging during loading/unloading; integrated design fits limited space without affecting cargo handling.
WZ15L (40/60kW) focuses on medium to high power, while WZ15W (20/30kW) emphasizes lightweight and portable installation. When space is extremely limited, choose WZ-15W, which does not occupy ground space. If there is ample space, choose WZ-15L to improve charging efficiency.
The default length for regular cables is 3.5m, and the entire range supports customized cables of 3-7M length
Peak efficiency ≥ 96%; The power factor is all>0.98, with low energy loss.
Related Products
Related Knowledges
-
Faults and Handling of Single-phase Grounding in 10kV Distribution LinesCharacteristics and Detection Devices for Single-Phase Ground Faults1. Characteristics of Single-Phase Ground FaultsCentral Alarm Signals:The warning bell rings, and the indicator lamp labeled “Ground Fault on [X] kV Bus Section [Y]” illuminates. In systems with a Petersen coil (arc suppression coil) grounding the neutral point, the “Petersen Coil Operated” indicator also lights up.Insulation Monitoring Voltmeter Indications:The voltage of the faulted phase decreases (in01/30/2026 -
Neutral point grounding operation mode for 110kV～220kV power grid transformersThe arrangement of neutral point grounding operation modes for 110kV～220kV power grid transformers shall meet the insulation withstand requirements of transformer neutral points, and shall also strive to keep the zero-sequence impedance of substations basically unchanged, while ensuring that the zero-sequence comprehensive impedance at any short-circuit point in the system does not exceed three times the positive-sequence comprehensive impedance.For 220kV and 110kV transformers in new constructi01/29/2026 -
Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?Why Do Substations Use Stones, Gravel, Pebbles, and Crushed Rock?In substations, equipment such as power and distribution transformers, transmission lines, voltage transformers, current transformers, and disconnect switches all require grounding. Beyond grounding, we will now explore in depth why gravel and crushed stone are commonly used in substations. Though they appear ordinary, these stones play a critical safety and functional role.In substation grounding design—especially when multiple gr01/29/2026 -
Why Must a Transformer Core Be Grounded at Only One Point? Isn't Multi-Point Grounding More Reliable?Why Does the Transformer Core Need to Be Grounded?During operation, the transformer core, along with the metal structures, parts, and components that fix the core and windings, are all situated in a strong electric field. Under the influence of this electric field, they acquire a relatively high potential with respect to ground. If the core is not grounded, a potential difference will exist between the core and the grounded clamping structures and tank, which may lead to intermittent discharge.I01/29/2026 -
Understanding Transformer Neutral GroundingI. What is a Neutral Point?In transformers and generators, the neutral point is a specific point in the winding where the absolute voltage between this point and each external terminal is equal. In the diagram below, pointOrepresents the neutral point.II. Why Does the Neutral Point Need Grounding?The electrical connection method between the neutral point and earth in a three-phase AC power system is called theneutral grounding method. This grounding method directly affects:The safety, reliabilit01/29/2026 -
What’s the Difference Between Rectifier Transformers and Power Transformers?What is a Rectifier Transformer?"Power conversion" is a general term encompassing rectification, inversion, and frequency conversion, with rectification being the most widely used among them. Rectifier equipment converts input AC power into DC output through rectification and filtering. A rectifier transformer serves as the power supply transformer for such rectifier equipment. In industrial applications, most DC power supplies are obtained by combining a rectifier transformer with rectifier equ01/29/2026
Related Solutions
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical m04/22/2025 -
RW8000 DMS Distribution Management System SolutionsOverviewNowadays, the development trend of power grid is intellectualization. As an important part of power grid, the power distribution system is very close to the customers and it has to run properly. The distribution management system (DMS）played an important role in it.Introduction:RW8000 power distribution management system (DMS) is designed for the smart grids. It is based on real-time application, centered on distribution network operation and management, focusing on the business process09/07/2023 -
High-Precision Electrical Parameter Monitoring System Solution1.IntroductionWith the increasingly stringent requirements for power supply quality in high-end facilities such as precision manufacturing, medical diagnosis, and data centers, traditional power monitoring systems, due to their low sampling accuracy and weak data analysis capabilities, can no longer meet the demand for deep insight and precise management of power quality. In response, we are introducing a new generation High-Precision Electrical Parameter Monitoring System. With millisecond-l09/28/2025
