| Brand | Wone Store |
| Model NO. | YJLW Series cross-linked cable |
| Rated voltage | 66kV |
| number of core | 1-core |
| Nominal cross-sectional area | 630mm² |
| cable insulation structure | XLPE insulatio& Water-blocking Layer&Al Sheath&PVC sheath |
| Conductor type | Al-core |
| Series | YJLW Series |
Overview
This productis suitable for 110-500kV power transmission and distribution system for thetransmission of electrical energy, low smoke no accounting for the flameretardant performance higher than the national standard, widely used inairports, nuclear power plants, key water control projects, high-risebuildings, Chemical, metallurgy, petroleum, traffic and other flame-retardantproperties demanding places.
Implementationstandards
66-132kV product implementationstandards: GB / T 11017 and GB / T 19666, the flame retardant properties inline with GB / T 18380 requirements;
220-500kV product implementationstandards: GB / T 18890 and GB / T 19666, the flame retardant properties inline with GB / T 18380 requirements.
Name and structure
Model |
Name | |
Cu-core |
Al-core |
|
YJLW02 |
YJLLW02 |
Cross - linked polyethylene insulated, corrugated aluminum or welded corrugated aluminum sheath and polyvinyl chloride sheathed power cable. |
YJLW03 |
YJLLW03 |
Cross - linked polyethylene insulated, corrugated aluminum or welded corrugated aluminum sheath and polyethylene sheathed power cable. |
YJLW02 - Z |
YJLLW02 - Z |
Cross - linked polyethylene insulated, corrugated aluminum or welded corrugated aluminum sheath and polyvinyl chloride sheathed longitudinal water blocking power cable. |
YJLW03 - Z |
YJLLW03 - Z |
Cross - linked polyethylene insulated, corrugated aluminum or welded corrugated aluminum sheath and polyethylene sheathed longitudinal water blocking power cable. |
parameters
66KV cross-linked power cable
Nominal cross- sectional area mm² |
Diameter of conductor mm |
Nominal thickness of insulation mm |
Thickness of aluminum sheath mm |
Thickness of over sheath mm |
Approximation outer diameter mm |
Approximate Weight(kg/km) |
|||
Copper (Cu)- PVC sheath |
Copper (Cu)- PE sheath |
Aluminum (Al)- PVC sheath |
Aluminum (Al)- PE sheath |
||||||
240 |
18.5 |
13.5 |
2.0 |
4.0 |
78 |
6598 |
6281 |
5128 |
4811 |
300 |
20.7 |
13.5 |
2.0 |
4.0 |
80 |
7329 |
7003 |
5487 |
5161 |
400 |
23.5 |
13.5 |
2.0 |
4.0 |
83 |
8317 |
7979 |
5961 |
5623 |
500 |
26.5 |
13.5 |
2.0 |
4.0 |
86 |
9546 |
9194 |
6520 |
6168 |
630 |
29.8 |
13.5 |
2.0 |
4.0 |
89 |
11113 |
10748 |
7201 |
6836 |
800 |
33.8 |
13.0 |
2.0 |
4.0 |
93 |
12912 |
12534 |
7902 |
7524 |
800F |
35.0 |
13.0 |
2.0 |
4.0 |
96 |
13614 |
13180 |
8604 |
8170 |
1000F |
39.2 |
13.0 |
2.0 |
4.5 |
102 |
15844 |
15390 |
9557 |
9103 |
1200F |
42.0 |
13.0 |
2.0 |
4.5 |
106 |
17641 |
17173 |
10313 |
9845 |
| 1400F | 46.0 | 13.0 | 2.0 | 4.5 | 109 | 19771 | 19287 | 11190 | 10706 |
| 1600F | 48.6 | 13.0 | 2.0 | 4.5 | 112 | 218.06 | 21308 | 12010 | 11512 |
110KV cross-linked power cable
Nominal cross-sectional area mm² |
Diameter of conductor |
Nominal thickness of insulation |
Thickness of aluminum sheath mm |
Thickness of over sheath mm |
Approximation outer diameter mm |
Approximate Weight(kg/km) |
|||
Copper (Cu)- PVC sheath |
Copper (Cu)- PE sheath |
Aluminum (Al)- PVC sheath |
Aluminum (Al)- PE sheath |
||||||
240 |
18.5 |
19.0 |
2.0 |
4.0 |
90 |
7967 |
7599 |
6497 |
6129 |
300 |
20.7 |
18.5 |
2.0 |
4.0 |
91 |
8603 |
8230 |
6761 |
6388 |
400 |
23.5 |
17.5 |
2.0 |
4.0 |
92 |
9363 |
8986 |
7007 |
6630 |
500 |
26.5 |
17.0 |
2.0 |
4.0 |
94 |
10492 |
10106 |
7466 |
7080 |
630 |
29.8 |
16.5 |
2.0 |
4.5 |
98 |
12203 |
11766 |
8291 |
7854 |
800 |
33.8 |
16.0 |
2.0 |
4.5 |
102 |
14034 |
13583 |
9024 |
8573 |
800F |
35.0 |
16.0 |
2.0 |
4.5 |
106 |
14542 |
14073 |
9532 |
9063 |
1000F |
39.2 |
16.0 |
2.3 |
4.5 |
110 |
17054 |
16565 |
10767 |
10278 |
1200F |
42.0 |
16.0 |
2.3 |
5.0 |
114 |
19136 |
18589 |
11808 |
11261 |
1400F |
46.0 |
16.0 |
2.3 |
5.0 |
118 |
21356 |
20787 |
12775 |
12206 |
1600F |
48.6 |
16.0 |
2.3 |
5.0 |
121 |
23434 |
22849 |
13638 |
13053 |
132KV cross-linked power cable
Nominal cross-sectional area mm² |
Diameter of conductor mm |
Nominal thickness of insulation |
Thickness of aluminum sheath mm |
Thickness of over sheath mm |
Approximation outer diameter |
Approximate Weight(kg/km) |
|||
Copper (Cu)- PVC sheath |
Copper (Cu)- PE sheath |
Aluminum (Al)- PVC sheath |
Aluminum (Al)- PE sheath |
||||||
240 |
18.5 |
19.5 |
2.0 |
4.0 |
91 |
8097 |
7725 |
6627 |
6255 |
300 |
20.7 |
19.0 |
2.0 |
4.0 |
92 |
8735 |
8357 |
6893 |
6515 |
400 |
23.5 |
19.0 |
2.0 |
4.0 |
96 |
9767 |
9377 |
7411 |
7021 |
500 |
26.5 |
19.0 |
2.0 |
4.0 |
99 |
11043 |
10641 |
8017 |
7615 |
630 |
29.8 |
19.0 |
2.0 |
4.5 |
103 |
12924 |
12464 |
9012 |
8552 |
800 |
33.8 |
18.0 |
2.0 |
4.5 |
106 |
14625 |
14156 |
9615 |
9146 |
800F |
35.0 |
18.0 |
2.0 |
4.5 |
109 |
15154 |
14666 |
10144 |
9656 |
1000F |
39.2 |
18.0 |
2.3 |
4.5 |
114 |
17701 |
17194 |
11414 |
10907 |
1200F |
42.0 |
18.0 |
2.3 |
5.0 |
118 |
19809 |
19243 |
12481 |
11915 |
1400F |
46.0 |
18.0 |
2.3 |
5.0 |
122 |
22048 |
21459 |
13467 |
12878 |
1600F |
48.6 |
18.0 |
2.3 |
5.0 |
125 |
24144 |
23539 |
14348 |
13743 |
220KV cross-linked power cable
Nominal cross-sectional area mm² |
Diameter of conductor |
Nominal thickness of insulation |
Thickness of aluminum sheath mm |
Thickness of over sheath mm |
Approximation outer diameter |
Approximate Weight(kg/km) |
|
Copper (Cu)- PVC sheath |
Copper (Cu)- PE sheath |
||||||
400 |
23.5 |
27.0 |
2.4 |
5.0 |
116 |
13141 |
12504 |
500 |
26.5 |
27.0 |
2.4 |
5.0 |
119 |
14515 |
13860 |
630 |
29.8 |
26.0 |
2.4 |
5.0 |
121 |
15887 |
15225 |
800 |
33.8 |
25.0 |
2.4 |
5.0 |
124 |
17683 |
17004 |
800F |
35.0 |
25.0 |
2.4 |
5.0 |
127 |
18285 |
17586 |
1000F |
39.2 |
24.0 |
2.6 |
5.0 |
130 |
20519 |
19805 |
1200F |
42.0 |
24.0 |
2.6 |
5.0 |
134 |
22490 |
21752 |
1400F |
46.0 |
24.0 |
2.6 |
5.0 |
137 |
24759 |
24001 |
1600F |
48.6 |
24.0 |
2.6 |
5.0 |
140 |
26920 |
26144 |
1800F |
52.0 |
24.0 |
2.8 |
5.0 |
144 |
29208 |
28413 |
2000F |
55.2 |
24.0 |
2.8 |
5.0 |
148 |
31602 |
30783 |
500KV cross-linked power cable
Nominal cross-sectional area mm² |
Diameter of conductor mm |
Nominal thickness of insulation mm |
Thickness of aluminum sheath mm |
Thickness of over sheath mm |
Approximation outer diameter |
Approximate Weight(kg/km) |
|
Copper(Cu)- PVC sheath |
Copper (Cu)- PE sheath |
||||||
800 |
33.8 |
34.0 |
2.9 |
6.0 |
150 |
20393 |
19688 |
800F |
35.0 |
34.0 |
2.9 |
6.0 |
152 |
20772 |
20047 |
1000F |
39.2 |
33.0 |
3.0 |
6.0 |
154 |
23057 |
22317 |
1200F |
42.0 |
33.0 |
3.0 |
6.0 |
158 |
25068 |
24310 |
1400F |
46.0 |
32.0 |
3.0 |
6.0 |
160 |
27419 |
26640 |
1600F |
48.6 |
32.0 |
3.1 |
6.0 |
163 |
29679 |
28876 |
1800F |
52.0 |
31.0 |
3.2 |
6.0 |
165 |
32036 |
31213 |
2000F |
55.2 |
31.0 |
3.2 |
6.0 |
169 |
34476 |
33636 |
2200F |
57.4 |
31.0 |
3.2 |
6.0 |
171 |
36318 |
35464 |
2500F |
61.5 |
31.0 |
3.3 |
6.0 |
175 |
39548 |
38671 |
800 |
33.8 |
34.0 |
2.9 |
6.0 |
150 |
20393 |
19688 |
Usefeatures
1、Maximum rated temperature
Long-term maximum allowable operatingconductor temperature: 90 ℃,Maximum operating temperature under short-timeoverload: 105 90 ℃,Maximum operating temperature under short circuit (shortcircuit duration 5 s): 250 ℃
2、Installation requirements
Cable laying shall not be restrictedby drop height; the ambient temperature for laying shall not be lower than 0 90 ℃;C,and if the ambient temperature is lower than 0 90 ℃, the cable shall bepre-heated.
2.1Minimum bending radius of cable
During cablelaying: 20D0; and Permanentinstallation: 15D0.
Note: D0 is measured outerdiameter of cable.
2.2Maximum allowable axial traction for cable installation, T (radial sidepressure at bend not being considered)
Conductor: T=K x Conductor section (kg)
Aluminum sheath:T x Aluminum sheath section(kg)
Where, the coefficient K=7kg/mm2for copper conductor and 4kg/mm2 for aluminum conductor and 2kg/mm2 for aluminum sheath.
2.3Maximumallowable side pressure when cable is bent, P
P=T/R≤500(kg/m), where T is axialtraction, and R is bending radius.
-
19/33kV Medium Voltage Cables
-
66-500kV High-Voltage Power Cables with Cross-Linked Polyethylene (XLPE) Insulation
-
6-35kV Medium-Voltage Power Cables with Cross-Linked Polyethylene (XLPE) Insulation
-
38/66kV 220/400kV High and Extra High Voltage Cables
-
26/35kV Fire-Resistant Armored Cable with Cross-Linked Polyethylene (XLPE) Insulation
-
26/35kV Class C Power Cable low Smoke Zero Halogen (LSZH) Flame-Retardant
-
YJA Series HV cross-linked cable
-
Why Regular Transformer Maintenance Matters: 5 Serious Consequences of Neglecting ItI. Allowable TemperatureWhen a transformer is in operation, its windings and iron core generate copper loss and iron loss. These losses are converted into heat energy, causing the temperature of the transformer's iron core and windings to rise. If the temperature exceeds the allowable value for a long time, the insulation will gradually lose its mechanical elasticity and age.The temperature of each part of the transformer during operation is different: the winding temperature is the highest, folRockwell09/12/2025 -
How to Implement Condition-Based Maintenance for Power Transformers? A Complete 4-Step Process Analysis1. Definition of Condition-Based MaintenanceCondition-based maintenance refers to a maintenance method where decisions on whether and how to perform maintenance are determined based on the real-time operating status and health condition of equipment. It has no fixed maintenance methods or schedules. The prerequisite for condition-based maintenance is the establishment of equipment parameters and the comprehensive analysis of various operational information of the equipment, so as to make reasonaNoah09/12/2025 -
Can't choose a dry-type transformer? Get expert advice – free.Traction Rectifier TransformersRated capacity: 800 to 4400 kVA; Voltage class: 10 kV and 35 kV; Rectifier pulse number: 12-pulse and 24-pulse. Compared with 12-pulse rectifier circuits, 24-pulse rectifier circuits can reduce the harmonic pollution of the power grid by 50%, and no filtering equipment is needed at this location. It is suitable for power supply systems of urban subways and rail transit.Excitation Rectifier TransformersRated capacity: 315 to 3000 × 3 kVA; Voltage class: 10 kV, 13.8Vziman09/12/2025 -
SG10 Series Transformer Overload Protection Solution | Prevent Overheating and Damage, View NowOperating Conditions in National Standard GB 6450-1986Ambient temperature: Maximum ambient temperature: +40°C Daily average maximum temperature: +30°C Annual average maximum temperature: +20°C Minimum temperature: -30°C (outdoor); -5°C (indoor) Horizontal axis: Product load; Vertical axis: Average coil temperature rise in Kelvin (note: not in Celsius).For Class H insulation products, the long-term temperature resistance of insulation materials is stipulated by the state as 180°C. However, the inRockwell09/12/2025 -
High harmonics? Your transformer may be overheating and aging fast.This report is based on the analysis of one-day power quality monitoring data of your company's distribution system. The data shows that there is significant three-phase current harmonic distortion in the system (with a high total harmonic distortion of current, THDi). In accordance with international standards (IEC/IEEE), harmonic currents at this level have posed substantial risks to the safe, reliable, and economical operation of the power supply transformer, mainly manifested in additional hLeon09/12/2025 -
Ultimate Guide to AC Contactor Abnormal Noise: From Electromagnetic Noise to Mechanical Vibration, Accurate Diagnosis and HandlingIn electrical control systems, AC contactors are among the commonly used electrical components, and they are also a common source of various electrical faults. After long-term use—especially in harsh environments with high levels of dust—AC contactors may sometimes emit squeaking or rattling noises after being pulled in and held. The causes of this phenomenon are analyzed as follows.Squeaking Noise After Pull-In and HoldingA fully functional AC contactor makes no noise when energized and pulledFelix Spark09/11/2025
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying SystemProject BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
