30KW ON/OFF Grid Wind Power controller
Key attributes
| Brand | Wone Store |
| Model NO. | 30KW ON/OFF Grid Wind Power controller |
| Input Voltage | 380V |
| Series | WWGIT |
Product descriptions from the supplier
Features
▪ Controller&Inverter integrated system (only for wind power generation)
▪ 30-point power curve can be set
▪ Complete protection functions
▪ RS485/GPRS monitoring modes optional
▪ Support standard modbus protocol
▪ Optional pitch yaw function
Applications
▪ Distributed wind power grid-tied system.
▪ Solar&wind hybrid power grid-tied system.
▪ Wind power grid-tied system.
Technical Parameters
Model |
WWGIT300 |
Wind turbine input |
|
Rated input Power |
30kW |
Max input Power |
45kW |
Rated input voltage |
380VDC |
MPPT voltage range |
100V~450VDC |
Rated input current |
46A |
Max input current |
68A |
cutting speed |
60RPM（factory default） |
Power tracking |
30 points set power curve |
Speed limit control |
Electromagnetic speed limit |
Manual brake |
YES |
Brake by overcurrent |
YES |
Brake by over rotational speed |
YES |
Brake by over wind speed |
optional |
AC output |
|
Grid type |
Three phase |
Rated output power |
30kW |
Max output power |
33kW |
Rated output voltage |
380VAC |
Grid voltage range |
85%~110% of rated grid voltage |
Rated grid frequency |
50Hz/60Hz adaptive |
work frequency range |
49Hz~51Hz/59Hz~61Hz |
Rated output current |
46A |
Rated power factor |
＞0.98 |
Thdi |
＜5%（at rated power） |
DC component |
＜0.5% |
soft start |
Yes |
Restoring grid-connected functionality |
Yes |
Auto on/off |
Yes |
Protection functions |
|
grid overvoltage/undervoltage protection |
Yes |
grid over frequency/under frequency protection |
Yes |
output short circuit protection |
Yes |
Grid power failure protection |
Yes |
Anti-islanding protection |
Yes |
over temperature protection |
Yes |
Lightning protection |
Yes |
Residual current protection |
Yes |
General Parameters |
|
Display mode |
LED+LCD |
Display information |
Display: wind Voltage, Wind current，Wind power, Wind Speed, Pole Paris; Inverter voltage, Inverter current, Inverter Power, Inverter Frequency, Relay Time, power generation; BUS Voltage, Air speed, Temperature, Time, Language, ID, etc. Status: Manual brake, automatic brake, fault indication, grid-connected state, relay state, Wind cut-in, etc. |
Monitoring mode(optional) |
RS485/WIFI |
Monitoring contents |
Telemetry: wind turbine speed, grid voltage, output power, power generation. Remote signal: wind turbine status, wind power grid-connected inverter over-current alarm, over-voltage alarm, over-temperature alarm, fault alarm, etc. Remote control: modify the parameters of the wind power grid-connected inverter and control the braking of the wind turbine |
Efficiency |
＞95% |
Ambient temperature |
-20℃～+40℃ |
Humidity |
0%~90%，no condensing |
Vibration resistance |
Can withstand sine wave vibration with a frequency of 10Hz~50Hz and an amplitude of 0.35mm |
Noise |
≤65dB |
Cooling mode |
Forced fan cooling |
Note: Part of parameters can be adjusted according to customer's specific demand. |
|
Related Products
-
100-600W high-performance wind-solar complementary controller
-
10-30kW Single-phase OFF-Grid Wind&Solar Hybrid Controller
-
10-30kW Three-phase OFF-Grid Wind&Solar Hybrid Controller
-
1-30KW off-gird wind power controller
-
50KW ON/OFF Grid Wind Power controller
-
20KW ON/OFF Grid Wind Power controller
-
10KW ON/OFF Grid Wind Power controller
Related Knowledges
-
How to Identify Internal Faults in a Transformer?Measure DC resistance: Use a bridge to measure the DC resistance of each high- and low-voltage winding. Check whether the resistance values among phases are balanced and consistent with the manufacturer’s original data. If phase resistance cannot be measured directly, line resistance may be measured instead. The DC resistance values can indicate whether the windings are intact, whether there are short circuits or open circuits, and whether the contact resistance of the tap changer is normal. IfFelix Spark11/04/2025 -
Front-Panel Visible Wiring Standards for Electrical Control PanelsFront-panel visible wiring: During manual wiring (not using templates or molds), wiring must be straight, neat, closely attached to the mounting surface, rationally routed, and with secure connections that facilitate maintenance. Wiring channels should be minimized as much as possible. Within the same channel, bottom-layer conductors shall be grouped by main and control circuits, arranged in a single-layer parallel dense layout or bundled, and kept closely attached to the mounting surface. ConduJames11/04/2025 -
What are the requirements for inspecting and maintaining a transformer's no-load tap changer?The tap changer operating handle shall be equipped with a protective cover. The flange at the handle shall be well sealed with no oil leakage. Locking screws shall securely fasten both the handle and the drive mechanism, and the handle rotation shall be smooth without binding. The position indicator on the handle shall be clear, accurate, and consistent with the tap voltage regulation range of the winding. Limit stops shall be provided at both extreme positions. The insulating cylinder of the tLeon11/04/2025 -
What Are the Common Inverter Fault Symptoms and Inspection Methods? A Complete GuideCommon inverter faults mainly include overcurrent, short circuit, ground fault, overvoltage, undervoltage, phase loss, overheating, overload, CPU malfunction, and communication errors. Modern inverters are equipped with comprehensive self-diagnostic, protection, and alarm functions. When any of these faults occurs, the inverter will immediately trigger an alarm or shut down automatically for protection, displaying a fault code or fault type. In most cases, the fault cause can be quickly identifiFelix Spark11/04/2025 -
What are the causes of dielectric withstand failure in vacuum circuit breakers?Causes of Dielectric Withstand Failure in Vacuum Circuit Breakers: Surface contamination: The product must be thoroughly cleaned before dielectric withstand testing to remove any dirt or contaminants.Dielectric withstand tests for circuit breakers include both power-frequency withstand voltage and lightning impulse withstand voltage. These tests must be performed separately for phase-to-phase and pole-to-pole (across the vacuum interrupter) configurations.Circuit breakers are recommended to be tFelix Spark11/04/2025 -
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
