Download the app
  • SF6-free air-insulated switchgear for secondary distribution
SF6-free air-insulated switchgear for secondary distribution
discuss personally
Model
UniSec Air-24
Basic info Product Detail Supplier
Basic info
Brand ABB
Model NO. SF6-free air-insulated switchgear for secondary distribution
Rated voltage 24kV
Rated frequency 50/60Hz
Series UniSec Air
Product Detail

Description:

UniSec Air is a medium voltage switchgear designed for secondary distribution up to 24kV, 630A, 20kA. It contains GSec Air, three-position load break switch or disconnector and earthing switch. This new component has a shunt vacuum interrupter for breaking capacity, dry air as the insulation medium, and a global warming potential (GWP) of zero. The switchgear also contains a vacuum circuit breaker and is fully compliant with IEC standards and the U F-gas regulation (EU) 2024 / 573. 
The switchgear is based on a highly flexible and modular  concept with standardized solutions that can be  readily configured to meet the specific needs of each application. UniSec Air is fully tested according to IEC standard 62271-200. 
UniSec Air is internal arc classified, IAC A FLR up to 20 kA, assuring safe operations for technicians when standing in  front of the switchgear. Robust control and protection, metering, monitoring, and diagnostics suitable for various applications are also available. 
UniSec Air is designed with a refined interface and with  the same footprint, operations, and backward compatibility as the original UniSec switchgear,facilitating integration into existing systems and extensions of the installed base.

Customer benefits:

F-gas regulation compliance 

  • Fully compliant with the EU F-gas regulation (EU) 2024 / 573

  • GWP of 0

Flexible and modular design

  • Better accessibility to MV cable connection and simplified installation, use, and maintenance.

  • Wide range of functional units equipped with LBS and disconnector, circuit breaker, conventional measuring transformers, current and voltage sensors, and protection relay solutions, making it suitable for most indoor applications.

  • Provides flexibility for a high level of customization to meet demanding requirements and is easy to order thanks to user-friendly configurator tools.

  • Compact design with multiple functional units width 375, 500 and 750mm for installation in a wide variety of electrial rooms and layouts.

  • Backward compatibility between UniSec Air and UniSec allows for easy integration into existing systems and extensions of the installed base.

 Safe and Reliable

  •  Internal arc classification available with various gas exhaust variants  for enhanced safety.

  • Service continuity solutions LSC2B / LSC2A / LSC2 tailored for application needs, ensuring minimal service interruption.

  • High operator safety features an internal arc-proof design and a wide range of mechanical and electrical interlocks to enhance operator safety.

  • The GSec Air component has an internal volume of less than 25 liters.

  • Fast and dependable delivery times with pre-engineered just to install (JTI) switchgear solutions.

Main Technical Characteristics:

 GSec Air:

 

Know your supplier
ABB
As an authorized distributor of ABB products, we take great pride in our partnership.
Main Categories
High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus
Business Type
Sales
Highest Annual Export (USD)
$580000000
Professional Experience
11 years
Workplace
20000m²
占位
占位
Documents
Public.
SF6-free air-insulated switchgear for secondary distribution
Manual English
PDF
FAQ
Q： What standards and certifications that ABB’s medium voltage switchgear products comply with?
A：
Our medium voltage switchgear products comply with international standards such as IEC 62271, GOST, GB/DL. They are also certified by leading industry bodies to ensure the highest levels of safety and performance. ABB also offers medium voltage switchgear products for ANSI standards.
Q： What’s the difference in the circuit breaker for air-insulated vs gas-insulated?
A：
Air-insulated switchgear circuit breaker is typically removable or withdrawable. The circuit breaker is based on vacuum circuit technology. In the gas-insulated, it is fixed mounted. The function of withdraw is provided by a separate disconnecting switch. Typically, a three-position switch with connected, disconnected, and ready-to-earth position.
Related Products
More
Related Knowledges
More
How is the contradiction between the small grounding residual current and the neutral point displacement voltage exceeding the standard resolved?
How is the contradiction between the small grounding residual current and the neutral point displacement voltage exceeding the standard resolved?
Contradiction PointsIn automatic tracking arc suppression coils, the adjustment precision is high, the residual current is small, and the operation is close to the resonance point.In an automatic tracking arc suppression coil grounding system, two factors must be considered: Under normal operating conditions, the long-term voltage displacement of the neutral point should not exceed 15% of the system's nominal phase voltage; In the case of a ground fault, the grounding residual current should be
Edwiin
07/28/2025
Power Supply Design of the Group Testing Device for Special Transformers in Electrified Railways
Power Supply Design of the Group Testing Device for Special Transformers in Electrified Railways
1 Hardware Design of Tester Power SupplyThis device uses a standard small - signal generating device to generate small - current signals with the required frequency and phase angle. Then, through the amplifying circuit and phase - modulating circuit, the working power supply is generated.1.1 Power Frequency Sine Wave Small - Current Signal Generating DeviceThe sine wave generating circuit is mainly composed of the waveform generating chip MAX038 produced by MAXIM Corporation of the United States
Ron
07/28/2025
Analysis of Testing Methods for Turns Ratio and Connection Mode of Special Transformers
Analysis of Testing Methods for Turns Ratio and Connection Mode of Special Transformers
1 Error Analysis of Traditional Turn Ratio Testing MethodsThe QJ35 turn ratio bridge and other single-phase-phase-based testers all use the double-voltmeter principle. The QJ35, however, eliminates power supply fluctuation interference via bridge balance. For three-phase transformer ratio testing with a single power supply, corresponding terminals must be shorted and data converted, turning three-phase tests into independent single-phase measurements, with √3 Yd conversion based on connect
Felix Spark
07/28/2025
What are the production processes of special transformers?
What are the production processes of special transformers?
A certain special transformer manufacturing enterprise, which has been producing special transformers such as split - phase - shifting rectifier transformers, rectifier transformers for electrolysis, and transformers for submerged arc furnaces for more than 20 years. Now, an evaluation is made on the production process flow and its characteristics of the special transformers after the company's transformation.1.Production Process Flow Chart of Special TransformersThe production of special transf
Leon
07/28/2025
Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil
Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil
For users, when purchasing a 35kV new energy transformer, choosing between dry-type, mineral oil-filled, or vegetable oil-filled types involves multiple considerations. These include user habits, maintenance-free performance, safety and fire resistance, volume and weight, among others. However, cost differences are undoubtedly one of the most crucial factors.To illustrate the issue intuitively, this paper selects a three-level energy efficiency dual-winding new energy transformer with a rated ca
Ron
07/26/2025
What is the connection group of a transformer?
What is the connection group of a transformer?
Transformer Connection GroupThe connection group of a transformer refers to the phase difference between the primary and secondary voltages or currents. It is determined by the winding directions of the primary and secondary coils, the labeling of their start and end terminals, and the connection mode. Expressed in a clock-like format, there are 12 groups in total, numbered from 0 to 11.The DC method is commonly used to measure the transformer's connection group, mainly to verify whether the con
Vziman
07/26/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!
App Store App Store App Store App Store App Store App Store App Store App Store
App Store