GRT8-X1 Multifunctional Digital Display Time Relay
Key attributes
| Brand | Wone Store |
| Model NO. | GRT8-X1 Multifunctional Digital Display Time Relay |
| Rated frequency | 50/60Hz |
| Series | GRT8 |
Product descriptions from the supplier
Product Description
The GRT8-X1 Multifunctional Digital Display Time Relay combines versatile timing functions with a clear digital screen for intuitive operation. It supports multiple timing modes, ensuring precise control for industrial machinery, production lines and automated systems. With stable performance, easy parameter adjustment and real-time display of timing status, it simplifies complex timing tasks, enhancing efficiency and reliability in various commercial and industrial applications.
Function Features
20 delay modes:
5 delay modes controlled by the power supply
13 delay modes controlled by a signal
ON, OFF mode
Ultra-wide delay range, 0.1 seconds – 99 days can be set.
Relay status is indicated by LED.
1-MODULE, DIN rail mounting.
Technical Parameters
GRT8-X1 |
GRT8-X2 |
||
Function |
20 functions |
||
Supply terminals |
A1-A2 |
||
Voltage range（W240） |
AC/DC 12-24V(50-60Hz) |
||
Burden（W240） |
AC 0.09-3VA/DC 0.05-1.7W |
||
Voltage range（A230） |
AC230V(50-60Hz) |
||
Power input（A230） |
AC max.6VA/1.3W |
AC max.6VA/1.9W |
|
Supply voltage tolerance |
-15%;+10% |
||
Supply indication |
green LED |
||
Time ranges |
0.1s-99day,ON,OFF |
||
Time setting |
Key setting |
||
Time deviation |
≤1% |
||
Repeat accuracy |
0.2%-set value stability |
||
Temperature coefficient |
0.05%/℃,at=20℃(0.05%°F, at=68°F) |
||
output |
1×SPDT |
2×SPDT |
|
Current rating |
16A(AC1) |
2x16A(AC1) |
|
Switching voltage |
250VAC/24VDC |
||
Min. breaking capacity DC |
500mw |
||
Output indication |
red LED |
||
Mechanical life |
1×10^7 |
||
Electrical life(AC1) |
1×10^5 |
||
Reset time |
max.200ms |
||
operating temperature |
-20℃ to+55℃(-4°F to 131°F) |
||
Storage temperature |
-35℃to+75℃ (-22°F to 158°F) |
||
Mounting/DIN rail |
Din rail EN/IEC 60715 |
||
Protection degree |
IP40 for front panel/IP20 terminals |
||
Operating position |
any |
||
overvoltage cathegory |
Ⅲ. |
||
Pollution degree |
2 |
||
Max.cable size(mm²) |
solid wire max.1×2.5 or 2×1.5/with sleeve max.1×2.5(AWG12) |
||
Dimensions |
90×18×64mm |
||
Weight |
1xSPDT:W240-62g,A230-60g |
||
2xSPDT:W240-82g,A230-81g |
|||
Standards |
EN61812-1,IEC60947-5-1 |
||
Related Products
-
GRW8-01 02 Temperature Monitoring Relay
-
Digital Timer Switch TS-GE2 Programmable Periodic Timer
-
Digital Timer Switch THC 822 16A Weekly Programmable
-
Digital Timer Switch THC 109-16A Light Dependent Relay ＆accessories
-
Digital Timer Switch THC 109B-16A Light Dependent Relay ＆accessories
-
Digital Timer Switch THC 15A Programmable Periodic Timer
-
Digital Timer Switch THC 20-1C Weekly Programmable
Related Knowledges
-
How to Identify Internal Faults in a Transformer?Measure DC resistance: Use a bridge to measure the DC resistance of each high- and low-voltage winding. Check whether the resistance values among phases are balanced and consistent with the manufacturer’s original data. If phase resistance cannot be measured directly, line resistance may be measured instead. The DC resistance values can indicate whether the windings are intact, whether there are short circuits or open circuits, and whether the contact resistance of the tap changer is normal. IfFelix Spark11/04/2025 -
Front-Panel Visible Wiring Standards for Electrical Control PanelsFront-panel visible wiring: During manual wiring (not using templates or molds), wiring must be straight, neat, closely attached to the mounting surface, rationally routed, and with secure connections that facilitate maintenance. Wiring channels should be minimized as much as possible. Within the same channel, bottom-layer conductors shall be grouped by main and control circuits, arranged in a single-layer parallel dense layout or bundled, and kept closely attached to the mounting surface. ConduJames11/04/2025 -
What are the requirements for inspecting and maintaining a transformer's no-load tap changer?The tap changer operating handle shall be equipped with a protective cover. The flange at the handle shall be well sealed with no oil leakage. Locking screws shall securely fasten both the handle and the drive mechanism, and the handle rotation shall be smooth without binding. The position indicator on the handle shall be clear, accurate, and consistent with the tap voltage regulation range of the winding. Limit stops shall be provided at both extreme positions. The insulating cylinder of the tLeon11/04/2025 -
What Are the Common Inverter Fault Symptoms and Inspection Methods? A Complete GuideCommon inverter faults mainly include overcurrent, short circuit, ground fault, overvoltage, undervoltage, phase loss, overheating, overload, CPU malfunction, and communication errors. Modern inverters are equipped with comprehensive self-diagnostic, protection, and alarm functions. When any of these faults occurs, the inverter will immediately trigger an alarm or shut down automatically for protection, displaying a fault code or fault type. In most cases, the fault cause can be quickly identifiFelix Spark11/04/2025 -
What are the causes of dielectric withstand failure in vacuum circuit breakers?Causes of Dielectric Withstand Failure in Vacuum Circuit Breakers: Surface contamination: The product must be thoroughly cleaned before dielectric withstand testing to remove any dirt or contaminants.Dielectric withstand tests for circuit breakers include both power-frequency withstand voltage and lightning impulse withstand voltage. These tests must be performed separately for phase-to-phase and pole-to-pole (across the vacuum interrupter) configurations.Circuit breakers are recommended to be tFelix Spark11/04/2025 -
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025
Related Solutions
-
Dedicated Vacuum Contactor Solution for Port Shore Power SystemsI. Background and ChallengesShore power systems have become core technical equipment for ports to reduce carbon emissions and noise pollution. However, these systems face two major challenges in the harsh operational environment of ports:Severe Environmental Corrosion: High humidity and salt spray in port areas cause serious corrosion to metal components and enclosures of electrical equipment, significantly impacting electrical lifespan and operational reliability.High Switching Requirements:Wone Store09/13/2025 -
ABB Vacuum Contactor KC2 Power Supply System Technical Transformation PlanIssue OverviewThe 10kV air compressor starting system of a company utilizes the ABB vacuum contactor KC2 as the control component for the operating circuit. The dedicated wide-voltage power supply module paired with this contactor presents the following issues:Frequent failures: The power supply module fails to properly transition the voltage from 300V to 12V, resulting in fuse blowouts.Poor heat dissipation: Enclosed installation of the module leads to insufficient heat dissipation, accelerWone Store09/13/2025 -
Solution for Medium-Voltage Motor Control and Protection Using Vacuum Contactor-Fuse (VCF) in a Coal Conveying System1.Project BackgroundA coal conveying system comprises 15 belt conveyors driven by medium-voltage motors. The system operates under complex conditions, with motors often subjected to heavy loads and frequent starts. To address these challenges and achieve effective control and reliable protection during motor startup, the project comprehensively adopts Vacuum Contactor-Fuse (VCF) combination devices for the 6kV medium-voltage motor power distribution. This solution details the technical features,Wone Store09/13/2025
