Free Expert Guides on Power Systems, Circuit Design & Electrical Troubleshooting

This article addresses this gap by presenting a comprehensive review of common dc-link MLCs, covering their topological evolution, features, topologies comparison, modulation techniques, control strategies, and industrial application areas. Additionally, future perspectives and recommendations are discussed to provide researchers and engineers with a better understanding of the potential applications and advantages of these converters.1.Introduction. Considering the major evolutionary stages o

Voltage instability is a serious phenomenon that can occur in a power system because of critical or stressed conditions. To prevent voltage collapse caused by such instability, accurate voltage collapse prediction is necessary for power system planning and operation. This paper proposes a novel collapse prediction index (NCPI) to assess the voltage stability conditions of the power system and the critical conditions of lines. The effectiveness and applicability of the proposed index are investi

This paper proposes a novel configuration of a dual UPQC supplied by a dual photovoltaic (PV), hereinafter referred to as 2UPQC-2PV,to improve the power quality performance of a single-phase 220 V/50 Hz distribution system. The 2UPQC-2PV configuration is proposed to anticipate the possible failure of both inverters in one of the UPQC circuits. The PV array replaces the DC-link capacitor to maintain its voltage connected to the DC-link of the UPQC constant while at the same time supplying active

The increasing demand for high performance and energy efficiency in Artificial Neural Networks (ANNs) accelerators has driven a wide range of application-specific integrated circuits (ASICs). Besides, the rapid deployment of low-power IoT devices requires highly efficient computing, which as a result urges the need to explore low-power hardware implementations in different domains. This paper proposes a spatially unrolled time-domain accelerator that uses an ultra-low-power digital-to-time conve

This paper presents the open-source Python-based parameter extractor (SEKV-E) for the simplified EKV (sEKV) model, which enables the modern low-power circuit designs with the inversion coefficient design methodology. The tool extracts the essential sEKV parameters automatically from the given I - V curves using the direct extraction and the multi-stage optimization process. It also handles the overfitting issue because of non-linear least squares. Moreover, this work demonstrates t

With the increasing demand for transparent/flexible displays, healthcare sensors, and robotics, there is a need to advance the development of thin-film transistors (TFTs) manufacturing and large-scale circuits. This paper has proposed an IGZO-TFT-PDK to aid the educators and research community to explore the circuit design space of dual-gate IGZO-TFT devices. To solve the tensile force-induced current variation problem in IGZO-TFT devices, an omni-directional device and its layout template with

The penetration of power electronics into power generation and distribution systems has deepened in recent years, as prompted by the increasing use of renewable sources, the quest for higher performance in the control of power conversion, as well as the increasing influence of economic plans that necessitate power trading among different regions or clusters of power distribution. As a result of the increased use of power electronics for controlling power flows in power systems, interactions of p

In this paper, a transformer-based bandwidth (BW) extension technique is employed to improve the BW, noise, and silicon area of inverter-based transimpedance amplifiers (TIAs) even when they use inductive peaking. A TIA based on the proposed technique, designed and laid out in a 16-nm FinFET process, demonstrates a 36% increased in BW, a 19% reduction in input-referred noise, and a 57% reduction in silicon area compared to the conventional TIA with inductive peaking. In the proposed TIA architec

This paper reviews and analyses the design of popular radio frequency energy harvesting systems and proposes a method to qualitatively and quantitatively analyze their circuit architectures using new square-wave approximation method. This approach helps in simplifying design analysis. Using this analysis, we can establish no load output voltage characteristics, upper limit on rectifier efficiency, and maximum power characteristics of a rectifier. This paper will help guide the design of RF energ

Target detection and field surveillance are among the most prominent applications of wireless sensor networks. However, the sensing capabilities of sensors are affected by environmental factors in real deployment. This paper investigates the problem of detecting probability in a log-normal shadow fading environment. It presents an analytic method to evaluate the detection probability by at least k sensors under practical considerations. Furthermore, we also shows that shadow fading makes signifi