Free Expert Guides on Power Systems, Circuit Design & Electrical Troubleshooting

Common Transformer Inspection Methods for Safe & Reliable OperationTransformers are essential electrical devices that transfer energy between circuits by electromagnetic induction, stepping voltage up or down to minimize power losses during transmission. For instance, industrial plants often receive electricity at 10 kV, which is then stepped down via transformers to usable low-voltage levels.To ensure transformers operate safely and efficiently, regular inspection is critical. Below are fou

Comparison of Domestic and International Transformer StandardsAs a core component of power systems, the performance and safety of transformers directly affect grid operation quality. The IEC 60076 series standards established by the International Electrotechnical Commission (IEC) correspond multidimensionally with China’s GB/T 1094 series standards in technical specifications. For example, regarding insulation levels, IEC specifies that power frequency withstand voltage for transformers rated at

1. Definition of Condition-Based MaintenanceCondition-based maintenance refers to a maintenance method where decisions on whether and how to perform maintenance are determined based on the real-time operating status and health condition of equipment. It has no fixed maintenance methods or schedules. The prerequisite for condition-based maintenance is the establishment of equipment parameters and the comprehensive analysis of various operational information of the equipment, so as to make reasona

Transformers and Their Role in Enhancing Power QualityTransformers are fundamental components in power systems, playing a critical role in maintaining and improving electrical power quality. Power quality refers to the degree to which electrical energy conforms to defined parameters, including voltage stability, frequency, waveform integrity, and reliability. This article explores the significant contributions of transformers to power quality improvement.Voltage RegulationOne of the primary func

Power transformers can be classified into several categories based on their purpose, structure, and other characteristics: According to purpose: Step-up transformer:Increases voltage from low to high levels, enabling efficient long-distance power transmission. Step-down transformer:Decreases voltage from high to low levels, supplying power to local or nearby loads through distribution networks. According to phase number: Single-phase transformer Three-phase transformer According to windi

1. Abnormal Temperature Rise of the TransformerWhen the transformer's oil temperature or coil temperature exceeds the allowable value during operation, the following steps should be taken to identify the cause and take measures to reduce the temperature: Check the oil temperature and coil temperature that should be present under the load and cooling medium temperature. Check if the temperature displayed on the CRT of the transformer is normal. Check if the cooling device is functioning properly,

Magnetizing inrush current in electric arc furnace transformers is a problem that troubles many electrical engineers. So, why does magnetizing inrush current occur in arc furnace transformers? First, let's understand what magnetizing inrush current is.Magnetizing inrush current refers to the transient current generated in the secondary winding of an arc furnace transformer due to core saturation, increased magnetic field strength, and other factors. This phenomenon is very common during the oper

In grid-connected photovoltaic (PV) power generation systems, the step-up transformer is a critical component. Optimizing transformer selection to minimize inherent losses and enhance efficiency is essential for improving overall system performance. This article outlines key considerations for proper step-up transformer selection in PV systems. Transformer Capacity SelectionThe required transformer capacity is calculated as: Apparent Power = Active Power / Power Factor. Power factor requirements

At 12:45 on August 4, 2022, a dispatching center received a report from a 100 MW photovoltaic power generation base. It was reported that the incoming line switchgear on the 35 kV low - voltage side of the main transformer at the collection station was on fire, and the protection action tripped. After receiving the notification, relevant personnel went to the site and carried out on - site accident investigation together with the operation technicians. Through on - site inspection, it was found

1 Significance of Selecting and Optimally Designing Wind Turbine Transformers in Wind FarmsAs wind power systems spread, more power transformers are integrated, boosting total equipment capacity and operating losses. Transformers, made mainly from costly silicon steel sheets, copper windings, and foils, are also tough to design. Thus, optimal design and scientific selection are needed to meet technical, national - standard, and user requirements.To ensure stable transformer operation, study thei